Sony LF-B1 Quick Start Manual page 13

To set up an unencrypted wireless signal, select Open authentication A and No encryption
3
B. Select Set C to save the changes. Then select the Back button D.
A
B
C
D
Settings > Monitor > On the go - Wireless > Public Wireless Access > Connection Settings
4 2
Select an SSID you want to connect to and select Connect.
5
If the wireless signal is unencrypted, the Wireless signal quality level appears A and the
icon on the top bar B changes to
make sure you entered the correct encryption code in step
(page 12) and choose another SSID.
2
Settings > Monitor > On the go - Wireless > Public Wireless Access
6
Try to connect to any website. Most hotspots requiring a login will automatically redirect
you to the login page. Note that some hotspots may require a fee.
7
Go to TV or Video and select NetAV to start!
A dialog box will show that you are Connecting, then > Authenticating > Buffering.
Shortly the picture will appear. Enjoy!
1
Some commercial hotspots require an encryption code to log-on. If needed, enter the encryption code at this step. Also,
note that some commercial hotspots require a fee for access.
2
SSID stands for Service Set Identifier, a label that distinguishes one wireless LAN from another.
. If the wireless signal quality level does not appear,
B
A
13
1
(page 13) or go back to step
3