Maintenance; Customer Responsibilities; Lubrication; Air Cleaner - Craftsman 247.776350 Operator's Manual

Customer R esponsibilities
MAINTENANCE _ ,,o ,b _,_ m e _ SERVICE
SCHEDULE no ._e6 _e.A ._e6 oe _o< DATES
,_ _ _ _ o_ ,_
Lube Spring Latch
Lube Chipper Chute Hinge ,q_
a Lube DischargeChute q_
O
Inspect Chipper Blades _
Inspect Shredder Blade ,:_
Check Oil Level
Change Oil _ ,q_
Wz Clean Air Filter Precleaner _/7 ,_
Clean Engine <_ 4_
Check Spark Plug _ d
Lubrication
Spring Latch: Lubricate the latch with light oil once a
season
Chipper Chute Hinge: Lubricate the hinge with light oil
once a season.
Discharge Chute: Lubricate the pivot points on the
chute deflector with light oil once a season.
Engine: Check engine oil level before each use as
follows:
Remove the dipstick and wipe with a clean cloth.
4b
Full
Figure 13
Replace and tighten dipstick.
Remove and check the oil fill level. Add oil if
necessary (Refer to Page 9 for proper oil type).
Air Cleaner
Clean air cleaner's precteaner every 25 hours under
normal conditions. To remove air cleaner, proceed as
follows:
Remove knob and cover. See Figure 14.
I_'_" Knob
i
Cover_
_
Air Cleaner
Cartridge
Pre-cleaner
Stud
Base
Figure 14
13