Beaming Image Files - Sony CLIE PEG-NR70V Application Manual

Copying image files
1
In the photo list screen, tap
The check boxes used for selecting the image files appear.
2
Tap the check boxes to select the image files you want
to save.
3
Tap Import.
The Import/Export dialog box appears.
4
Tap OK.
The selected image files are saved to the CLIÉ handheld. Depending
on the image file, this may take a few seconds.

Beaming image files

You can beam PGP-format image files stored on your CLIÉ handheld
or the inserted Memory Stick media to another Palm OS PDA. (You
cannot beam DCF-format image files.)
Notes
• If Beam Receive in the Preferences menu is set to Off, you cannot receive data
using the beaming feature. Before beaming data, make sure to set Beam
Receive to On.
• You can only beam one image file at a time.
• Do not beam a 16-bit image file to a CLIÉ handheld with PictureGear Pocket
Ver.1.x installed, as it is not compatible with 16-bit image files. If you do, the
screen of the receiving handheld goes blank; in such cases, tap the screen to
recover to the state before beaming.
1
Display the image file that you want to beam (page 74
or 78).
2
Follow the steps in "Beaming Information" in the
Operating Instructions manual.
82
(Import/Export).