Connecting To A Computer Or A Network; System Requirements; Connecting The Camera To A; Computer - Sony IPELA SNC-RZ50N Install Manual

Connecting to a
Computer or a
Network
To connect to the computer, use a
commercially available network cable (cross
cable).
To connect to the network, use a
commercially available network cable
(straight cable).

System Requirements

These are the requirements for the computer
that displays the image or controls the
camera.
Processor
Intel Pentium 4, 1.5 GHz or higher (Pentium
4, 2.4 GHz or higher recommended)
RAM
256 MB or more
OS
Microsoft Windows 2000, Windows XP
Web browser
Microsoft Internet Explorer Ver. 6.0 or later
20
GB

Connecting to a Computer or a Network

Connecting the Camera to a

Computer

Using a commercially available network
cable (cross), connect the LAN port on the
camera to the network connector of a
computer.
SNC-RZ50N/RZ50P (rear)
CLASS 2 WIRING SEE INSTRUCTION MANUAL
m
LAN
LAN
Network cable
(cross, not supplied)
Computer
5
10 9 8 7 6 5 4 3 2 1
Network
connector