Craftsman 82140 Owner's Manual page 20

SPECIFICATIONS
Voltage Sensitivity
Frequency
Detection distance
Over voltage
Operating Temperature
Storage Temperature
Humidity
Altitude
Battery
Dimensions/Weight
Safety
BATTERY INSTALLATION
6. Open the battery door (end cap) by gently
prying up/out at the pocket clip using a small
screwdriver.
7. Insert two AAA batteries (observe polarity).
8. Replace the battery door.
NOTE: If your meter does not work properly,
check the battery to make sure that it still
good and that it is properly inserted.
100 to 240V AC
50/60Hz
<0.2"
Category III 600V
o
32 to 122 F (0 to 50
o
-4 to 140 F (-20 to 60
<85%RH
<2000 meters (6561 feet)
2 AAA batteries
6x0.75x1 inches / 2oz
For indoor use and in accordance with
Overvoltage Category III, Pollution Degree 2.
20
o
C)
o
C)
End cap
Removal
for battery
replacement