Page 1
CORDLESS WET AND DRY VACUUM CLEANER SAFETY & OPERATING INSTRUCTIONS H11 Pro The final interpretation right of the manual belongs to the MIUI brand...
this guide. Liquid must not be directed towards equipment containing electrical IMPORTANT TIPS components. ・ Do not use the vacuum with damaged cord or plug. If the cord or plug is damaged, ・ When using an electrical appliance, basic precautions should always be followed. it must be replaced by the manufacturer, its service agent or similarity qualified ・...
32 ℉ and below 40℃ /104 ℉ ). ・ If appliance has been dropped, damaged, left outdoors, dropped into water, or is Power On/Off not working as it should, never attempt to operate it. Please contact MIUI customer Mode Button service.
※ ※ Charging Base Handle Installation Instructions Charging Contacts Charging Port ※ Display Screen Strong Mode Dry Mode Wet Drag Mode Dirty Water Tank Self-cleaning Clean Water Tank Battery Status/Error Insert the end of the handle into If you want to disassemble, please Charging the port of the host along the ver- remove the screws on the back of...
※ ※ Charging Instructions Preparing for Use NOTE NOTE CHARGE FULLY BEFORE FIRST USE. BEFORE FIRST USE, PLEASE CHARGE THE APPLIANCE (REFER TO"CHARG- ・ CHARGING ING INSTRUCTIONS"FOR DETAILS). ① Place the charging base on the horizontal ground placed against the wall. Connect Press the button for a long time to turn the device on.Press the button briefly...
※ Filling Clean Water Tank Place the appliance on the charging base vertically after use for recharge and stor- age. Press the Clean Water Tank release button to remove it from the appliance. ※ One-Click Self-Cleaning The self-cleaning function can be enabled only when the appliance is charged and the battery level is more than 10%.
※ Clean the Dirty Water Tank ※ Clean the Filter NOTE NOTE IT IS RECOMMENDED TO CLEAN IT AFTER EACH USE. IT IS RECOMMENDED TO EMPTY THE DIRTY WATER TANK AFTER EACH Remove the filter from the top of the dirty water tank. Rinse the filter with clean wa- USE, AND AFTER THE SELF-CLEANING FUNCTION IS ENABLED.
※ Brush Roller SPECIFICATIONS Model H11 Pro Remove the brush roller by grabbing the Charging Input 100-240V brush roller tab and pulling upward. Rated Power 200W Battery Capacity 4000mAh Rated Frequency 50/60Hz Use the included cleaning brush to remove hairs and debris that get stuck in the roller...
Need help?
Do you have a question about the H11 Pro and is the answer not in the manual?
Questions and answers