User's guide to BGT24LTR11
XENSIV™ 24 GHz radar MMIC
Table of contents
2.5
Frequency divider
BGT24LTR11's frequency divider has two divider ratios, divide by 16 and divide by 8182 which result in output
frequencies of 1.5 GHz and 3 MHz respectively.
Table 2
Setting the divider ratio
Divider ratio
16
8192
Setting the divider to a 3 MHz output will cause the PTAT to consume current. This ratio is usually used only in
case of a software controlled VCO. In this use case, the V
look-up table (LUT), as explained in section 4.3.
Application note
Voltage at VCC_PTAT (pin 16)
< 0.8 V
3.3 V
is also required to check the validity of the used
PTAT
9
Revision 1.50
2023-02-14