Flexible Arm Installation - NEC LCD2190UXP-BK User Manual

Quick Start

Flexible Arm Installation

This LCD monitor is designed for use with a fl exible arm.
To mount the monitor to a fl exible arm:
1. Remove the stand (see Remove Monitor Stand for Mounting page 7).
2. Use the 4 screws that are included to attach the arm to the monitor
(Figure F.1).
100mm
CAUTION: Use ONLY the 4 screws that are included when mounting to avoid damag-
ing the monitor and the stand or arm. For safety requirements, the monitor
must be mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor. The LCD monitor should only
be used with an approved arm (e.g. GS mark).
– continued
100mm
(Figure F.1)
8