Download Print this page

Raise And Lower Monitor Screen - NEC E231W-BK User Manual

23" eco-friendly widescreen desktop monitor
Hide thumbs


Table of Contents
6. Connect the power cord to the power outlet (Figure C.1).
Please refer to Caution section of this manual for proper selection of AC power cord.
7. Turn on the monitor with the front power button and the computer (Figure C.1).
8. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings.
For further adjustments, use the following OSD controls:
• Auto Adjust Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to the Controls section of this User's Manual for a full description of these OSD controls.
If you have any problems, please refer to the Troubleshooting section of this User's Manual.

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to
the desired height (Figure RL.1).
Handle with care when raising or lowering the monitor screen.
Do not grasp the rear handle when raising or lowering the monitor. It may cause pitching your finger between the
stand and the monitor.
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).
Handle with care when tilting the monitor screen.
Power Button
Figure C.1
Figure RL.1
Figure TS.1


Table of Contents

  Also See for NEC E231W-BK

  Related Manuals for NEC E231W-BK

This manual is also suitable for:

E231w-bk-rMultisync e231w