Related Manuals for arcelik 7100 M
Summary of Contents for arcelik 7100 M
- Page 1 Washing Machine User Manual 7100 M Document Number: 2820530391_EN/ 25-07-22.(9:16)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Arçelik 7120 M Model name 7144843500 Rated capacity (kg) Maximum spin speed (rpm) 1000 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) 220-240 V / 50Hz Total current (A) -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply CAUTION! INFORMATION • Your drain house will be flooded if the • It is necessary to have 10 – 80 liters of hose comes out of its housing during water flowing from the fully open tap in water discharge. -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. - Page 9 4.2 Preparation 4.2.3 Tips for energy and water saving Following information will help you use the 4.2.1 Sorting the laundry product in an ecological and energy/water- • Sort laundry according to type of fabric, efficient manner. colour, and degree of soiling and allowable •...
-
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener • Wash woollens at suggested programme with special detergent made specifically for woollens INFORMATION • Please review the programme descriptions part • When using detergent, softener, starch, for suggested programme for different textiles. fabric dye, bleach and descaling agents; •... - Page 11 If the product is equipped with a liquid • Put tablet detergents into the main wash detergent part: compartment (compartment no. "2") or directly into the drum before washing. Using starch • Add liquid starch, powder starch or the dyestuff into the softener compartment. •...
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes Hijyen+ ( Hygiene+) • Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • Pamuklu (Cottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. -
Page 16: Special Programmes
Karma (Mix) • When the quick function is selected: You can use this programme to wash cottons and Blood Fruit juice synthetics together without the need to sort them. Chocolate Ketchup Pudding Red Wine Curry • Gömlek (Shirts) This programme is used to wash the shirts Coffee Coal made from cotton, synthetic and synthetic... - Page 17 4.3.10 Auxiliary function selection INFORMATION Select the desired auxiliary functions before starting the programme. You can also select • Use a lower spin speed for delicate laundries. or cancel auxiliary functions suitable for the 4.3.8 Temperature selection running programme without pressing the Start/ Pause button while the machine is operating.
-
Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
• İlave Su (Extra Water) INFORMATION This function allows you to wash your laundry with plenty of water, and rinse it in all the • If the Programme Selection knob is turned programmes indicated as selectable in the when the Child Lock is enabled, "Con" Programme and consumption table. - Page 19 Changing the delayed end time • AntiCrease+ If you want to change the time during countdown: If you press and hold the auxiliary function button Turn the programme selection knob to cancel the 3 for 3 seconds, this function will be selected delayed end time function, and then set the desired and the programme follow-up light of the relevant time again.
-
Page 20: Loading Door Lock
You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. -
Page 21: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting Loading door cannot be opened. • Loading door lock is activated because of the water level in the product. >>>Drain the water by running the Pump or Programmes do not start after the loading door is Spin programme. closed. - Page 25 Washing performance is poor: Laundry turns gray. (**) Washing machine does not rinse well. • Insufficient amount of detergent has been used over a long • The amount, brand and storage conditions of the detergent period of time. >>>Use the recommended amount of used are inappropriate.
- Page 26 (*) The product does not switch to spinning Too much foam forms inside the product. (**) step when the laundry is not evenly distributed • Improper detergents for the washing machine is used. >>>Use detergents appropriate for the washing machine. in the drum to prevent any damage to the •...
- Page 27 Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in https://www.arcelik.com.tr/destek. For your safety, unplug the product before attempting any self-repair.
Need help?
Do you have a question about the 7100 M and is the answer not in the manual?
Questions and answers