Black/White Level; Cinema Mode; Colour Temperature; Static Gamma - Toshiba 26EL933B Owner's Manual

Digital series
Table of Contents

Advertisement

Black/White Level

This function increases the strength of dark
areas of the picture, which improves picture
definition.
In the Picture Settings menu, press ▲
or ▼ to select Black/White Level.
Press ◄ or ► to adjust the level from
Off, Low, Middle or High. The effect
depends on the broadcast and is most
noticeable on dark colours.

Cinema Mode

A movie film's picture runs at 24 frames a sec-
ond, whereas movie software such as DVD,
etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a
smooth motion and picture quality, select the
Cinema Mode.
In the Picture Settings menu, press ▲
or ▼ to select Cinema Mode.
Press ◄ or ► to select On or Off.

Colour Temperature

Colour Temperature increases the 'warmth' or
"coolness" of a picture by increasing the red or
blue tint.
In the Picture Settings menu, press ▲
or ▼ to select Colour Temperature and
press ►.
Press ▲ or ▼ to select Colour Tem-
perature and press ◄ or ► to select
Medium, Warm or Cool to suit your
preference.
Colour Temperature
Colour Temperature
Red Level
Blue Level
Green Level
Press ▲ or ▼ to select Red Level, Blue
Level or Green Level and press ◄ or ►
to adjust the settings as required.
The static gamma feature allows you to adjust
the levels of black in the picture.
This feature resets all picture settings to the
factory settings.
In the Picture Settings menu, press ▲ or ▼
to select Reset and press
NOTE: If any picture settings have not been
When the Active Backlight Control feature is
activated, High mode will control the backlight-
ing levels depending on various scenes such
as picture motion, bright scene or dark scene.
Low mode will control the backlighting level on
dark scene.
When 3D Colour Management is set to On, it
allows the Base Colour Adjustment feature to
become available.
You can adjust the picture colour quality by se-
lecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
Medium
0
0
0
NOTE: When a DVD movie with subtitle is
45

Static Gamma

In the Picture Settings menu, press ▲
or ▼ to select Static Gamma.
Press ◄ or ► to select the number of
Static Gamma (-5~+5).

Reset

changed, Reset is not available.

Active Backlight Control

In the Picture Settings menu, press
▲ or ▼ to select Active Backlight
Control.
Press ◄ or ► to select Off, Low or
High.

3D Colour Management

In the PICTURE menu, press ▲ or ▼ to
select 3D Colour Management.
Press ◄ or ► to select On or Off.
playing back, this mode may not work
correctly.
to reset settings.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents