Resetting The Advanced Picture Settings; Expert Picture Settings - Toshiba 42VL863B Owner's Manual

CONTROLS AND FEATURES

Resetting the advanced picture settings

This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu, press
b
to select Reset.
b
Press OK.

Expert Picture Settings

Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the Picture menu, press
Picture Settings and press OK to display Expert
Picture Settings menu.
b
B b
Press or to select Test Pattern.
c
C c
Press or to select On.
d
Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.
a
In the Expert Picture Settings menu, press
select RGB Filter, and then press OK.
b
B b
Press or to select Red, Green or Blue to adjust.
c
C c
Press or to select On.
d
B b
Press or to select Colour or Tint, and then press
C c
or to adjust.
e
Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
B
or
B b
or to select Expert
B b
or to
38
Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT601 and BT709) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If BT601 or BT709 is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto.
a
In the Expert Picture Settings menu, press
select Colour Decoding.
b
C c
Press or to select Auto, BT601 or BT709.
White Balance-Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the Expert Picture Settings menu, press
select White Balance and press OK.
b
B b
Press or to select Window Display and press
c
or to select On.
c
Press EXIT to close.
White Balance-Setting Type
You can choose from two types of White Balance adjustment.
a
In the Expert Picture Settings menu, press
to select White Balance and press OK.
b
B b
Press or to select Setting Type and press
to select 2P or 10P.
White Balance-2P White Balance
a
b
Press to select 2P White Balance.
b
B b
Press or to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain.
c
C c
Press or to adjust.
White Balance-10P White Balance
a
b
Press to select 10P White Balance.
b
B b
Press or to select IRE, Red, Green, or Blue.
c
C c
Press or to adjust.
NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
B b
or to
B b
or to
C
B b
or
C c
or