Controls And Input Connections; Switching On; Using The Remote Control; Using The Controls And Connections - Toshiba 42VL863B Owner's Manual

Vl86 digital series
Hide thumbs Also See for 42VL863B:
Table of Contents

Advertisement

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
USB 1 port
Media Player
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
USB 2 port
Media Player/
WLAN adaptor ready for a home network

Switching on

If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.

Using the remote control

Press MENU on the remote control to display the menu.
The five initial topics icons will appear. As each symbol is
C
c
selected by pressing
or
BbC c
to enter a sub menu and then enter a further sub
menu to see any options.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear greyed out.
1
on the remote
1
on the remote
1
again. The picture may
on the remote control. Press
Control panel (touch sensor)
ORANGE LED – Programme timer set (digital only)
RED LED – Programme timer Active (digital only)
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.

Using the controls and connections

To alter the volume gently touch –
To alter the programme position touch
b p B
Touch MENU and
picture options.
Touch MENU to finish.
The Media Player feature provides access to photo, movie and
music files stored on an USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
The USB 2 socket has to be used with the "TOSHIBA Dual Band
WLAN Adaptor WLM-10U2" in order to access a wireless
network.
This feature is available only when the "TOSHIBA Dual Band
WLAN Adaptor" is used.
To select an external input, touch
input source is selected.
Please always refer to the owner's manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a "gun"
at an on-screen target may not work with this TV.
13
CONNECTING YOUR TV
Ambient
Light Sensor
RED LED – Standby
BLUE LED – Power on
B
b
and
on the remote control to
C
c
or
to select your desired
2
+.
b p B
.
2
, –
+ to control the sound and
o
until the appropriate

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

47vl863b

Table of Contents