Page 1
ISO 9001 Certified. PL Insurance. Patented( No. 10-0554098) Jog Shuttle Control System. Operation Manual (Version 2.2.2) written for MS-MP4, MS-MP8 models “MS-MP-8” Digital Multi-Point Magnetic Stirrers Sales & Basic A/S : By the Nearest Official Distributors. Man249 (18 Jun. 2020)
This symbol indicates power “OFF” on the power on/off switch. This symbol indicates power “ON” on the power on/off switch. This symbol indicates the connection point of the neutral conductor on the installed unit. This symbol indicates alternating current Voltage. DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 3 / 15...
■ Extraordinary Mechanical, Physical and Chemical Resistance ■ Locking Mode supported for Experimental Safety (Input to Jog-Shuttle can be disabled) ■ Free Voltage (AC 80V ~ 240V, 50 / 60Hz) by SMPS DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 4 / 15...
Product Liability (PL) Insurance Admission ¨ DAIHAN Scientific (Co., Ltd.) is a member of Product Liability Insurance (PL Insurance), so that its customers can trust our products, (believe and use its products,) by preparing against the accident which can be occurred during using the products by self-production.
8. Please be careful for burns because the residual heat may be remained even if this product is operating or the power was disconnected. 9. Please do not install this product around the product having strong magnetic force. DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 6 / 15...
Do not install the product in a location at an altitude of over 2,000 meters (6,562 feet). Do not operate the product outdoors. Avoid areas where the sun shines directly on the product. It could cause an overheating condition or a short circuit. DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 8 / 15...
Page 9
If unusual noise or signs of abnormal behavior are found during use of this product, please immediately contact the supplier or DAIHAN Scientific (Co., Ltd.) after turning off the power supply and disconnecting the power line.
※ All of the circuits, electrical or mechanical parts and configurations used in this product are the technical assets of DAIHAN Scientific (Co., Ltd.). Only technicians of the technical support team at DAIHAN Scientific (Co., Ltd.) or technicians approved through the education from DAIHAN Scientific should be allowed to repair this product.
Page 11
④ Power Bar-Graph : indicating the power of the motor operating ⑤ LED indicating Stirring operation ⑥ LED indicating Timer operation ⑦ Mode Selection Switch ⑧ Jog Shuttle Switch : Turning + Push Button Function DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 11 / 15...
3.3 Usage Instructions Please proceed as described in this manual when operating this product. 1. Power-On: Turn on the power switch, then the MS-MP4/8 get into RPM mode. Mode Selection: MS-MP4/8 series have 3 different Modes including default Mode. You can change the mode by push MODE switch ⑦.
Page 13
If you want to release locking mode, push the mode select button. 5. Power off After you complete to use the unit, you must turn off the power switch for your safety. DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 13 / 15...
2. Check that the power switch is in the ON position. ※ If you have any problem other than the above, please call technical service of manufacturer or an official agent. DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 14 / 15...
Need help?
Do you have a question about the MS-MP4 and is the answer not in the manual?
Questions and answers