Danfoss Optyma iCO2 Instructions Manual page 16

Instructions
Fig. 18
Caution for installation
1. Time to open up the condensing unit oil to the atmosphere should be as short as possible.
2. Use up the condensing unit oil for replenishment. Once oil container is opened, it should be used entirely and should not be stored for future use.
3. Ambient temperature at storage should be no higher than 40°C, and avoid places where it is exposed to direct sunlight or temperatures change
widely.
4. The oil become colorless and transparent.
5. Since the unit inside becomes in the state of vacuum during the replenishment of condensing unit oil, pay utmost attention not to introduce air.
6. Please note that a special device (manual pump) is required when condensing unit oil is charged after operating the unit,
7. Dispose of the condensing unit oil and container after opening according to the regulations of each country.
16 | AN405821998738en-000102 - 118A5495A
Oil service port
© Danfoss | Climate Solutions | 2023.02 | LCA012A024