Self-Cleaning Function - Taurus SUCCO EASY MILL Instructions For Use Manual

Downloaded by: pd-oliana on 11-08-2022 09:16 CEST
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
During the cleaning process, take special care
with the blades, as they are very sharp.
It is advisable to clean the appliance regularly
and remove any food remains.
The following pieces may be washed in a
dishwasher (using a soft cleaning program):
Jar
Lid
Measuring cup
Grinding cup
The draining/drying position of the articles
washable in the dishwasher or in the sink must
allow the water to drain away easily.
Then dry all parts before its assembly and
storage.

SELF-CLEANING FUNCTION:

Put water and a small amount of washing up
liquid in the jar.
Select the function "Pulse".
REMOVABLE BLADES FOR EFFECTIVE
CLEANING:
Loosen the blade fixing ring by turning it in
clockwise direction.
Remove the blade set and the sealing ring and
clean them.
After cleaning, replace the blade set and turn it
in opposite direction.