28
www.aeg.com
Problem
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "12.00".
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
12. ENERGY EFFICIENCY
12.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven-
tional mode
Energy consumption with a standard load, fan-forced
mode
Number of cavities
Heat source
Volume
Type of oven
Mass
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
Possible cause
You left the dish in the oven
for too long.
There was a power cut.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
ovens and grills - Methods for measuring
performance.
Remedy
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Reset the clock.
AEG
EE4003011M
103.5
A
0.99 kWh/cycle
0.88 kWh/cycle
1
Electricity
71 l
Built-Under Oven
36.0 kg
Need help?
Do you have a question about the EE4003011M and is the answer not in the manual?