Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
“
” indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set “BEEP-ON” (
) or “BEEP-OFF.”
z
AUX-A*
1
(AUX Audio)
To turn the AUX source display “AUX-A-ON”
(
) or “AUX-A-OFF” (page 7).
z
SUB/REAR*
1
To switch the audio output.
– “SUB-OUT” (
): to output to a subwoofer.
z
– “REAR-OUT”: to output to a power amplifier.
DIM (Dimmer)
To change the brightness of the display.
– “DIM-ON”: to dim the display.
– “DIM-OFF” (
): to deactivate the dimmer.
z
DEMO*
1
(Demonstration)
To set “DEMO-ON” (
) or “DEMO-OFF.”
z
LPF*
(Low Pass Filter)
2
To select the subwoofer cut-off frequency: “LPF
OFF” (
), “LPF125Hz” or “LPF 78Hz.”
z
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”