Download Print this page
Cornelius Flavor Fusion 22127 Installation Instructions
Cornelius Flavor Fusion 22127 Installation Instructions

Cornelius Flavor Fusion 22127 Installation Instructions

Cornelius ice maker installation instruction

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS

F
ED150-8V "K" S
OR
These "K" style kits apply to the following ice makers:
Cornelius 322/522
Crystal Tips 200/300/400
Ice-O-Matic
Manitowoc 320/420
Scotsman SLC 300/400
Servend S2/4
Item No.
Part No.
52994
1
52934
2
620028801
3
22127
4
70217
5
50904
6
90221
7
620912201
8
620701902
9
620701901
10
620037007
11
621701903
12
620505804
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer's instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
1. Unpack the kit.
2. Place insulation strip (item 12) over studs on the baffle and Insert baffle assembly into the adapter lid.
3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item11), then fasten in place with (2) plastic
acorn nuts (item 8).
4. Set ice maker lid on the top of the dispenser.
Release Date: November 9, 2010
© 1998-2010, IMI Cornelius Inc.
L
K
TYLE
ID
ITS
Table 1. Applicable Models
Ice Maker
Table 2. Loose Shipped Parts
Cover, Gray (630000191)
Cover, Black (630200153)
Lid Assembly
Bracket
#8 Screw
RTV
Label
Installation Instruction
Acorn Nut, 8-32 Nylon
Sealing Washer
Baffle, Ice DF/ED150
#8 Nylon Washer
Insulation Strip
www.cornelius.com
- 1 -
ED150-8V "K" Style Lid Kit Installation Instructions
, P/N 630200153
Name
630000191
AND
Width
22I
22"
22"
22"
22"
22"
Qty.
1
1
1
2
12
1
1
1
2
2
1
2
1
Revision: B
Publication Number: 620912201

Advertisement

loading

Summary of Contents for Cornelius Flavor Fusion 22127

  • Page 1: Installation Instructions

    3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item11), then fasten in place with (2) plastic acorn nuts (item 8). 4. Set ice maker lid on the top of the dispenser. Release Date: November 9, 2010 ©...
  • Page 2 6. Seal the ice maker to the top of the dispenser as follows: A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that the ice maker sets on the RTV.
  • Page 3 ED150-8V “K” Style Lid Kit Installation Instructions Figure 2. Dispenser Assembly © 1998-2010, IMI Cornelius Inc. - 3 - Publication Number: 620912201...

This manual is also suitable for:

Flavor fusion 50904Remcor 52994Remcor 620912201Remcor 630000191Remcor 630200153Remcor 70217 ... Show all