Before you can use your Gigaset S67H you
must register it to a base station. It can be
registered to a maximum of four base sta-
tions. The actual registration procedure
will depend on the type of base station.
Automatic registration of Gigaset S67H to
Precondition: The handset must not yet
have been registered to a base station.
The handset is automatically registered to
the Gigaset S670/675 base station.
Place the handset in the base station
with its display facing forward.
Registration can take up to 5 minutes.
During this process,
appears in the display and the name of the
base station flashes, e.g.
handset has registered, its screen displays
its internal number, e.g.
number 2. The handset is assigned the
lowest available internal number (1–6).
If all internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
– Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
– Each key press interrupts the automatic
– If automatic registration does not work,
you will have to register the handset manu-
1. When the
Manual registration Gigaset S67H
If the handset does not activate automati-
cally when the batteries are fitted, you
must first charge the batteries.
You must activate manual registration of
the handset on both the handset and the
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number appears in the display,
1. If it does not appear, repeat
On the handset
Select base station, e.g.
Enter the system PIN of the
base station (the default is
0000) and press
for example, see
ing in the display.
On the base station
Within 60 sec. press and hold the registra-
tion/paging key on the base station
(approx. 3 sec.).
You can connect various headset types
(with 2,5 mm jack connector), including:
HAMA Plantronics M40, MX100 and
A compatibility list of tested headsets can
be found on the Internet at
. You will,