Setting Your Own Area Code; Restoring The Handset To The Factory Settings; Appendix; Care - Siemens Gigaset S67H User Manual

Setting your own area code

In order to transfer phone numbers
(e.g. vCard), it is essential that your area
code (international and local area code) is
saved on the phone.
Some of these numbers are already pre-
set.
¢ ¢
v Ð
Handset
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
X
If necessary, delete number:
press the display key.
~
Enter number.
Press the display key.
§Save§
Example:
Area Codes
International code:
0000 - 49
Local area code:
0 - [ 89 ]
X
Save
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the Quick list, the call his-
tory and the handset's registration to the
base station as well as the content of My
stuff are retained.
¢ ¢
v Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
¢
Area Codes
¢
Reset Handset

Appendix

Care

¤
Wipe the charging cradle and the hand-
set with a damp cloth (do not use sol-
vent) or an antistatic cloth.
Never use a dry cloth. This can cause a
build up of static.

Contact with liquid

If the handset has come into contact with
liquid:
1. Turn the handset off and remove the
batteries immediately.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
4. Do not turn on the handset again un-
til it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Appendix
!
25