Download  Print this page

Siemens Gigaset S67H User Manual page 18

Siemens gigaset s67h: user guide
Hide thumbs

Advertisement

When the room monitor is activated,
incoming calls to the handset are indi-
cated without a ringer tone and are only
shown on the screen. The display and key-
pad are not illuminated and advisory
tones are also turned off.
If you accept an incoming call, the room
monitor mode is suspended for the dura-
tion of the call, but the function remains
activated.
If you deactivate then reactivate the hand-
set, the room monitor mode remains acti-
vated.
Caution!
– You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on the hand-
set's operating time is severely reduced. If
necessary, place the handset in the charg-
ing cradle. This ensures that the batteries
do not run down.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answer machine.
Activating the room monitor and
entering the number to be called
¢
¢
v
í
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
External number: Select the number
from the directory (press display key
Ò
) or enter it directly. Only the
last 4 digits are displayed.
Internal number:
¢
¢
s (select handset or
§OK§
if all registered handsets are to be
¢
called)
.
§OK§
¢
INT
§Options§
Call All
Using a handset as a room monitor
Level:
Set noise level sensitivity
¤
Press
to save the settings.
§Save§
Changing the set destination number
¢
¢
v
í
Room Monitor
s
Scroll to the
X
or
§Delete§
Delete existing number.
¤
Enter and save number as described in
"Activating the room monitor and
entering the number to be called"
(page 17).
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
.
§Save§
(Low
or High).
line.
Call to:
on the handset.
§OFF§
17

Advertisement

loading

  Also See for Siemens Gigaset S67H