Setting The Date And Time - Siemens Gigaset C595 User Manual

Setting the date and time

Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Date:
31.01.2009
Time:
00:00
Back
¤
Enter the hours and minutes as
four digit numbers via the keypad,
e.g. QM 5 for
07:15 am.
Change the input position with
the control key if necessary.
Calls Time
Date/Time
Save
¤
Press the key below
screen display to open the input
field.
(If you have already set the time and
date, open the input field via the
menu
The
Date/Time
the display.
¤
The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g. 4 Q
2QQO for 14/10/2009.
Press the right or left control
key to change the input posi-
tion and correct an entry.
¤
Press down on the control key to switch
to the time input field.
on the
§Time§
¢
page 27.)
submenu is shown on
Date/Time
Date:
14.10.2009
Time:
00:00
Back
First steps
Save
15