Preparing The Handset - Siemens Gigaset A580 Installation Manual

Preparing the handset

1
Inserting the supplied batteries and closing the battery cover
A
Insert the battery compartment
cover into the notches at the top of
the battery compartment.
B
Then press the battery compart-
ment cover until it clicks into
place.
>
The display is protected by a plastic film. Please remove this protective film.
2 Connecting the charging cradle and charging the batteries
B
A
>
Observe the
sequence
(A then B)!
>
Check the polarity when inserting the batteries
(see symbols in or on the battery
compartment).
>
Only use the recommended rechargeable
batteries.
Once the batteries have been inserted, the
handset switches on automatically.
10 h
>
Place the handset in the charging cradle and
wait until the batteries are fully charged.
>
Do not put the handset back in the
charging cradle until the batteries are
fully discharged through use.
>
After the first battery charge and
discharge, you may place your handset
in the charging cradle after every call.
>
The battery charging status is displayed
in the idle display: = e V U
(empty to full).
A
7
B