Download Print this page

Siemens CL75 User Manual: Charging Time; Charging The Battery

Siemens cl75: user guide.
Hide thumbs


Getting started
• Place the cover in position and
push it towards the front until it
latches into place.
Charging the battery
Charging the battery
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least three hours.
Display during charging.

Charging time

An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within a temperature range
of +5°C to 45°C. If the temperature
rises/falls 5°C above/below this, the
charge symbol flashes a warning.
The mains voltage specified on the
power supply unit must not be
Operating time
The operating time depends on the
respective conditions of use. Ex-
treme temperatures reduce the
phone's standby time. Avoid placing
the phone in the sun or on a heater.
Call time: 180 minutes
Standby time: 220 hours minimum
Charge symbol not visible
If the battery is fully discharged, the
charge symbol is not immediately
visible when the power supply is
plugged in. It will appear after up to
two hours. In this case the battery is
fully charged after 3 to 4 hours.
Only use the plug-in power supply
included in delivery!


   Related Manuals for Siemens CL75

Comments to this Manuals

Symbols: 0
Latest comments: