257*182mm
USE AND CARE GUIDE
6-PACK ACCENT LIGHTS COMBO WITH REMOTE CONTROL
Safety Information
Use caution and common sense when operating your accent light.
Failure to adhere to the safety warnings and guidelines in this manual could result in body injury or property
damage. Save this manual for future reference.
WARNING: Read and follow all warnings
and instructions in this manual to avoid
personal injury or property damange.
1. This product is not a toy and contains small parts. Close supervision is necessary when this unit is used near children or
operated by children.
2. For cleaning, use a soft dry cloth. Do not place or store appliance where it can fall or be pulled into a tub or sink.
Warranty
□This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. If this
product is defective, call 866-308-3976 for repair of replacement parts or return the product to the store from which it was
purchased.
□Guarantee does not include normal wear and tear, LED or batteries.
Pre-Operation
1. Package Contents
A
C
B
D
2. Battery Installation and Replacement
Accent Lights-Each light requires 3 AAA batteries (C).
Item #: 0000000000
□ Remove the battery cover.
Model #: 90101
□ Place 3 AAA batteries (C) into the battery compartment aligning
□ Replace the battery cover.
Remote Control-One piece CR2025 button battery
pre-installed. Remove the insulation sheet upon rst use.
Follow these steps to activate or replace the battery:
□ Slide the battery drawer out.
□ Remove the battery.
□ Place a new battery in position aligning polarity(+) (-) as
□ Slide the battery drawer in.
Operation
1. Operating the Accent Lights
A. Operating by Touch Control
□ Once the 3 AAA batteries are installed, turn on each accent light by short-press
□ Long-Press to switch colorful light among red/green/blue/off.
B. Operating by Remote Control
□ Press "
□ "
□ "
WARNING: To prevent damange to eyesight,
never look into light when the light is on. Do not
shine light into the face of someone else.
□ Color selector- Change color of LEDs to be white, red, green or blue.
□ All lights will return to the prior color when turned ON.
□ Automatically turn off in 2 hours for power saving.
2. Mounting Instructions
□ Remove the protective paper on the mounting tape (D) and apply to the location
□ The light yes detachable from the mounting tape and can be used as magnetic
light.
Care and Maintenance
□ When replacing batteries always replace the whole set.
□ Use same brand and same type of batteries in the same light.
□ Do not use rechargeable or reusable batteries
□ Follow battery manufacturer's instructions as to proper handling, storage and disposal of batteries.
Troubleshooting
Part
Description
Quantity
A
Accent Light
6
□ If the light does not work, make sure the battery is installed correctly or brand new.
Remote Control
B
1
□ If the remote control does not work, make sure the plastic sheet is removed and battery is installed correctly or brand new.
C
AAA Heavy Duty Battery
18
□ If the remote control is not working properly, make sure there is no obstacle between you and the accent light(s), and that
D
Mounting Tape with Metal Plate
6
the remote is not positioned too far away from the lights.
FRONT
polarity (+) (-) as indicated.
10
30
MIN
MIN
60
120
indicated.
MIN
MIN
the Dome Cover for the white light.
Then long-press again to switch to White mode.
" to turn all lights ON, press "
" to turn all lights OFF.
" is to control brightness of all lights. Press and hold (+) or (-) to
increase and decrease brightness separately.
" is to control the amount of time the lights stay ON. Turn the
lights ON rst and select duration among 10, 30, 60, or 120 minutes.
Lights will ash once to con rm command. Timer clears when lights
turn OFF.
(use caution as the adhesive is very strong).
DOME COVER
10
30
MIN
MIN
60
120
MIN
MIN
Need help?
Do you have a question about the 90101 and is the answer not in the manual?
Questions and answers