Operation Panel - Sharp AL-800 Operation Manual

OPERATION PANEL

q w
q Exposure mode selector key and
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
(p. 21)
w Light and dark keys and exposure
indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.22)
Also used to start and terminate user
program settings. (p. 26)
e Alarm indicators
: Drum replacement
indicator (p. 29)
: TD cartridge replacement required
indicator (p. 28)
: Misfeed indicator (p. 34)
r Copy ratio selector key and copy ratio
indicators
Use to sequentially select preset reduction/
enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p. 22)
t Zoom indicator (p. 22)
y Copy ratio display (%) key (p. 22)
u Display
Displays the specified copy quantity, zoom
copy ratio, user program codes, and error
codes.
e r
200% MAX.
5 1 / 8 1 / 8 1 / 11
129% x x
2 2 2
100%
8 1 / 14 8 1 / 11
78% x x
2 2
8 1 / 11 5 1 / 8 1
64% x x
2 2
50% MIN.
required
t y u
/
2
ZOOM
!0 !1
i ON LINE indicator
Lights up when the machine is used as a
printer. (AL-840 only)
The ON LINE indicator is not included in
the AL-800.
Off: Indicates copying is being performed
or an alarm occurs.
Blinking: Indicates printing of data from the
computer has been interr upted and
copying is being performed.
o Power save indicator
Lights up when the copier is in a power
save mode. (p. 25, 26)
!0 Zoom keys
Use to select any reduction or enlargement
copy ratio from 50% to 200% in 1%
increments. (p. 22)
!1 Copy quantity keys
Use to select the desired copy quantity
(1 to 50). (p. 20)
Use to make user program entries.
(p. 26)
!2 Clear key
Press to clear the display, or press
during a copy run to terminate copying.
(p. 20)
Press and hold down during standby to
display the total number of copies made
to date. (p. 41)
!3 Print key and ready indicator
Copying is possible when the indicator
is on.
Use to set a user program.
i o
ON LINE
!2 !3
7
1