Setting Up - Sega Super Monkey Ball 2 User Manual

Setting Up

Hardware Setup
Super Monkey Ball 2 is a one to four player game.
Connect the Nintendo GameCube™ Controllers to
the Controller Sockets 1, 2, 3 and 4 (depending on
the number of players participating; see next page).
Using Progressive Scan TV
This software is compatible with Progressive Scan video output, using
the Component Cable (sold separately). Please refer to the instruction
manual of Nintendo GameCube™ for the directions on how to connect.
1
Connect your TV set and Nintendo GameCube™ with the
Component Cable.
2 Place the Super Monkey Ball 2 disc inside the GameCube™,
close the Disc Cover, and press the POWER Button.
3 After the Nintendo GameCube™ logo is displayed, press and hold
the b Button.
4 You will be asked whether to display in Progressive Mode. Select
"Yes" and the game will be displayed with Progressive Scan output.
Once the Progressive Mode is selected, unless the video cable is
changed, the Display Mode Select Screen will be displayed each
time the power is turned on, without pressing the
depending on the type of television set you are using, the horizontal/
vertical ratio of the screen may be changed.
Save Files
Super Monkey Ball 2 is a Memory Card compatible game [Nintendo
GameCube™ Memory Card (sold separately)]. 2 blocks of free
memory are needed to save game files, and at least 2 blocks for
each replay file.
When you start the game, the game will look for the game file. If there
are no Memory Cards inserted, the game will warn you and ask if
you would like to Retry (insert the Memory Card first) or Continue
without saving. If the Memory Card does not contain a game file,
the game will ask you either to continue without loading (create
new file), to retry, or to choose a Slot. If two Memory Cards, both
containing the game file, are found, the game will ask you which to
be used. Follow the on-screen instruction to start the game.
When the game file is being saved, manually or automatically, a
message will be displayed to notify that such action is taking place.
Never turn OFF the Nintendo GameCube™ power or remove the
Memory Card while the game data is being saved or loaded.
4
b
Button. Also,
Nintendo GameCube™ Controller
l
Button
Control Stick
+ Control Pad
START/PAUSE
Multiplayer Game – Simultaneous or Alternating
With some modes, more than one player can
enjoy the game, simultaneously or alternat-
ing. With simultaneous play, each player uses
his/her own controller to play. Connect the
same number of controllers as the number of
players participating.
When you select the number of players par-
ticipating in the games with simultaneous
play, you can only select up to same number
of controllers currently connected.
With alternating play, each player takes a
turn playing. Therefore it is possible that
more than one player can use the same con-
troller to play. During the Character Select
Screen, use the controller you are going to
use to select the character.
Basic Game Controls
Except for a few games, use the Control
Stick to move the monkey in a ball. Detailed
Button functions will be explained in each
game. Press START/PAUSE during the game
to pause the game and display the Pause
Menu (p.10).
Controls
r
Button
z
Button
y
Button
x
Button
a
Button
b Button
c
Stick
5