Advertisement
Before Using for the First Time
CAUTION: Risk of suffocation - keep all packaging and plastic bags out of the
reach of children.
1. Remove all packaging materials.
2. Clean the baking plates with a damp cloth or sponge.
3. Use a damp cloth to wipe down only the outside of the housing unit. Do NOT
use an abrasive scouring pad or steel wool as this could damage the finish.
NOTE: Prior to first use and in a well ventilated area, heat the waffle maker without
batter for ten minutes. You may notice smoke or a slight odor. This is normal with
most new appliances.
WARNING: Do NOT immerse the waffle maker in water or other liquid.
How to Use
1. Plug the waffle maker into the wall outlet; the red power light will illuminate.
2. With the appliance closed, turn the temperature control knob to your desired
setting - minimum to maximum (hottest). A lower setting produces a lighter-
colored waffle, while waffles made at a higher setting are darker and crispier.
Different waffle batters will also cook differently.
3. When the green ready light illuminates, the desired temperature has been
reached. Before baking the first batch of waffles, spray a light coating of
nonstick cooking spray, or use a pastry brush with vegetable oil to lightly coat
the top and bottom baking plates.
4. Ladle batter onto the middle of the bottom plates of waffle maker. Spread
evenly but do not go to the edges. Waffles will expand as the batter bakes.
5. Close waffle maker. Do not open for at least 1½ minutes. Opening the lid too
soon will cause under-baked waffles to split, making them difficult to remove.
6. When the green light is fully illuminated and no longer blinking, remove waffles.
If you want darker/crispier waffles, close the lid and continue cooking until the
desired color is achieved.
7. Remove waffles from the grid using non-metallic utensils.
8. Close waffle maker to retain heat until you are ready to make the next batch.
Always be sure the green light goes on again before making more waffles.
9. When cooking is complete, unplug the power cord from wall outlet. Leave
waffle maker open to cool. Do NOT move or clean until unit has cooled.
6
Wards.com
Cleaning & Care
This appliance contains no user-serviceable parts. Do NOT try to repair it yourself.
If your appliance is damaged or does not operate, please call customer service to
repair or replace it.
PRECAUTIONS:
• Always unplug unit and allow to cool before cleaning.
• Do NOT use anything abrasive that can scratch or damage the nonstick coating.
• NEVER IMMERSE THE HOUSING UNIT IN WATER OR PUT IN DISHWASHER.
1. Brush away any loose crumbs from the grooves.
2. Wipe baking plates with a paper towel or soft cloth, absorbing any oil that
might be in the grooves. Never use anything abrasive that can scratch or
damage the nonstick coating.
3. Wipe the outside of the waffle maker with a damp cloth only. Do not clean the
outside with an abrasive scouring pad or steel wool, as this will damage the
finish.
4. Should any batter become baked onto the grids, pour a little cooking oil on
to the hardened batter. Let sit 5 minutes to soften batter then wipe off with a
paper towel or soft cloth.
TO STORE:
Be sure all parts are clean and dry before storing. Store appliance in its box or in a
clean, dry place free from sharp objects. NEVER store it while it is hot or wet.
1
888
•
•
C
557
3848
•
7
Advertisement
