1 Preliminary note This document is part of the device and contains information about the correct handling of the product� This document is intended for specialists� These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device�...
► Contact the manufacturer of the corresponding device in case of any interference� 3 Functions and features In connection with the evaluation unit DTE10x the read/write head ANT424/ ANT425 enables non-contact reading and/or writing of the RFID transponders (ID tags) conforming to the system�...
Such devices are for example frequency converters and switched-mode power supplies� 5.4 Mechanical design 1: Sensing face (ANT424) 1: Sensing face (ANT425) 5.5 Fixing ► Fix the device using the supplied nuts (M18)�...
5.6 Mounting distances 5.6.1 ANT424 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 60 mm ≥ 100 mm 5.6.2 ANT425 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 90 mm...
5.7 Positioning of the ID tags 5.7.1 ANT424 ► Align the ID tag on the antenna central axis� Distance read/write head (D) ID tag Type plastics E80371 16 mm All indications apply to static read/write operations� 5.7.2 ANT425 ► Align the ID tag on the antenna central axis�...
► Connect the device to the evaluation unit DTE10x using the M12 connection� Voltage is supplied via the evaluation unit� DATA A selection of sockets is available on our website at: www�ifm�com Cables with the following characteristics are suitable for the connection: Length Ohmic resistance (feed + return line) Effective cable capacity <...
7 Display elements ANT424 ANT425 LED green: operating voltage LED yellow: ID tag Status Description Green Operating voltage OK Operating voltage missing FLASHING SLOWLY Deactivated Yellow ON (permanently) ID tag detected ON (pulse) ID tag read/written successfully FLASHING QUICKLY Error when reading/writing on ID tag...
9 Dimensions 9.1 ANT424 Original Scale D 0017 9.2 ANT425 EPS Source Product Scale Frame Size: 8 10 Technical data The data sheets are available on our website at: www�ifm�com 11 Maintenance, repair and disposal ► Do not open the housing as the device does not contain any components which must be maintained by the user�...
Page 13
Use in all EU countries 12.1.3 EC declaration of conformity ifm electronic gmbh hereby declares that the ANT424 / ANT425 radio system corresponds to the directive 2014/53/EU� You can find the EC declaration of conformity on our website at: www�ifm�com�...