Connecting External Equipment For Pip Operation - Sanyo DS31810 Owner's Manual

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio, for left
WHITE
audio and for
YELLOW
video.
A / V1 and A / V2
jacks have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
You may be able to
use the remote control
to operate your VCR,
DVD, Satellite
Receiver,
and Cable Box.
(See pages 7 ~ 9.)
Need help?
Visit our website at
www.sanyoctv.com
or
12
CONNECTING EXTERNAL EQUIPMENT
FOR PIP OPERATION
The PIP feature requires two signals to work: You must connect signals to the 75 ohm
terminal and to one set of the A/V jacks; or you must connect signals to both sets of A/V jacks.
CONNECTING A CABLE BOX AND VCR OR OTHER EXTERNAL
EQUIPMENT TO THE TV
Switch off TV and external equipment before connecting cables. (Cables and splitter
are not supplied.)
1. Connect signal (cable) to splitter
2. Connect cable from splitter
3. Connect cable from splitter
4. Connect cable from cable box out
5. Connect DVD, VCR, DSS, or other equipment's Audio Out (R/L) and Video Out to the TV
Audio Input (R/L) and Video Input
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Note: Use either A/V1 or A/V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment's S-Video Out to the TV S-Video In-1
Jack . Note: Using the S-Video In-1 jack overrides the Video1 Input jack
7. Press POWER
to turn on the TV
8. Press the INPUT/TV•VCR key
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second
set of A/V jacks.
DVD Player
Splitter
IN
.
to the TV 75Ω (ohm) terminal
to cable box .
to VCR Antenna In terminal
.
.
Turn on external equipment also.
to select program source: TV signal or signal from the
IN
FROM ANT.
CHANNEL
CH3 CH4
OUT
OUT TO TV
Back View
of a VCR
UHF/VHF/CATV
75Ω
OUT
Cable Box
TV A/V Input
Rear Jacks
.
.
VCR
Remote Control
A/V JACK
RF
IN
R- AUDIO -L VIDEO
OUT
R- AUDIO -L VIDEO
S-VIDEO IN - 1 S-VIDEO IN - 2
(MON0)
R AUDIO L VIDEO
AUDIO
VIDEO
INPUT
L
1
AUDIO
R
VIDEO
INPUT
2
AUDIO L VIDEO AUDIO
R
OUTPUT
(MON0)
.
TV DVD
AUX