Sanyo VCC-W8774 Specifications page 2

Specifications (NTSC)
VCC-W8774
Model.No
Scanning system
Image sensor
Image size
Synchronizing system
Day and Night
Resolution
Video output level
Video S/N ratio
Color 50 IRE
Minimum
illumination
20 IRE
B/W 50 IRE
20 IRE
Wide Dynamic
Backlight compensation
White balance
Light control
Electronic iris
Electronic shutter
Lens iris level
Auto iris output
Aperture correction
AGC gain
Digital noise reduction
Menu
Lens mount
Camera mount
Environmental conditions
Power requirement
Power consumption
Dimensions
Weight
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
NTSC standard 525 lines
Progressive scan 1/3" CMOS
800(H) x 600(V) effective picture elements
1/3" (4.5mm x 3.38mm)
Internal / Line lock synchronization
—
Horizontal: 550 TV lines (typical)
1.0Vp-p (75 ohms, composite)
More than 50dB (AGC off)
0.8 Ix (at F1.2)
0.32 Ix (at F1.2)
—
0.08 Ix (at F1.2)
—
0.032 Ix (at F1.2)
ON/OFF, adjusting level etc. 65dB*(typical)
ON / OFF
ATW / MANUAL
Optical auto iris lens / Electronic iris
ON / OFF
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000,1/4000, 1/10000
Level: L to H
DC type
High / Normal / Low / Off
High / Normal / Off
ON / OFF
OSD, title setting: 16 characters
CS mount
1/4"–20 UNC (top or bottom selectable)
Operating — Temperature: -10˚C to +50˚C
Humidity: within 90% RH
Storage —— Temperature: -20˚C to +70˚C
Humidity: within 70% RH
24V AC, 60Hz / 12 to 15V DC
6.9w
71.0 (W) x 45.0 (H) x 119.5 (D) mm
2.80 (W) x 1.77 (H) x 4.70 (D) inch
320g (11.29oz)
*JETA Measurement Method
NOTE: Specifications subject to change without notice.
Digital System Company of SANYO Electric Co., Ltd. obtained
Quality Management System ISO9001 and Environmental
Management System ISO14001 certifications .
Dimensions
VCC-WD8874
True D/N
T.B.D.
330g (11.64oz)
VCC-W8774
129.3 (5.09)
120.5 (4.74)
119.5 (4.70)
VCC-WD8874
129.3 (5.09)
120.5 (4.74)
119.5 (4.70)
*iridix technology is provided by Apical Limited, UK.
SANYO Electric Co., Ltd.
Digital System Company
http://www.sanyosecurity.com
©2008 SANYO Printed in Japan 2008.9.NP
SFA190F
Unit: mm (inch)
71.0 (2.80)
①
VIDEO OUT
POWER
+ ~
– ~
③
GND
CLASS 2 WIRING
Rear panel ②
①
Power indicator (POWER)
② Video output connector
③ Power connection terminals
(24V AC,12V DC,GND)
Unit: mm (inch)
71.0 (2.80)
①
ALARM OUT
VIDEO OUT
POWER ALARM IN
+ ~
COM
– ~
③
GND
CLASS 2 WIRING
Rear panel
② ④
① Power indicator (POWER)
② Video output connector
③ Power connection terminals
(24V AC,12V DC,GND)
④ Control terminals