Rf Tools - Murata Hn-210 Manual

RF Tools

Clicking on the RF Tools tab brings up a screen that allows the receive signal strength
to be monitored and the link quality to be observed. Range Optimization may be
grayed out on certain radios.
NOTE: RF Tools only work on HopNet radios operating as remote radios. The
radio must be linked with its base radio for the functions on this screen to work.
Range Optimization (HopNet 2410-based radios only)
This command automatically applies an adjustment factor to the over-the-air timing
of remotes to compensate for the effects of propagation delay at long ranges. Simply
click on the radio button opposite Range Optimization and the following screen will
display.
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2004
HN-210/210X 01/13/17 28 of 58
Downloaded From Oneyac.com
HN210
www.murata.com