Murata HN-210 Manual page 11

The program will read and display the current settings of the HN-210. The HN-210 is
shipped from the factory as a remote. The Remote button on the Wizard screen will
appear depressed indicating the HN-210 is a remote.
NOTE: The S/N displayed in the bottom left corner is the serial number of the
radio inside the unit and is different from the serial number of the HopNet unit.
Both the HopNet unit serial number and the radio serial number are on the radio
unit of the HopNet product.
To set the HopNet radio as a base, click on the Base button. The Base button will
depress and the Remote button will pop up. The screen heading will change from
"Remote Parameters" to "Base Parameters."
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2004
HN-210/210X 01/13/17 11 of 58
Downloaded From Oneyac.com
HN210
www.murata.com