Table of Contents
Advertisement
Configuration Commands
The HN-210 has a wide selection of configuration parameters that can be modified
using one or more of the configuration commands. The commands can be grouped
into five categories based on what they do. The five sections are:
• Serial Interface Commands
• Network Commands
• Protocol Commands
• Status Commands
• Memory Commands
Each command is described in detail below. In the descriptions, brackets ([,]) are
used to denote a set of optional arguments. Vertical slashes (|) separate selections.
For example, given the string wn[?|0..3f], some legal commands are wn?, wn0, wn3
and wna. Most commands which set a parameter also have a ? option which causes
the modem to respond with the current parameter setting, e.g., wn? When using the
WinCom window to enter these commands, the syntax must be followed as described.
Each modem command must be followed by either a carriage return or a line feed.
When these commands are entered from the main or advanced Wizard screen, the
Wizard will insure the proper syntax is used.
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2004
HN-210/210X 01/13/17
37 of 58
Downloaded From
Oneyac.com
HN210
www.murata.com
Advertisement
Table of Contents
Need help?
Do you have a question about the HN-210 and is the answer not in the manual?