Wisenet PNM-7082RVD User Manual
  1. Manuals
  2. Brands
  3. Wisenet Manuals
  4. Security Camera
  5. PNM-7082RVD
  6. User manual
Wisenet PNM-7082RVD User Manual

Wisenet PNM-7082RVD User Manual

Hide thumbs Also See for PNM-7082RVD:
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK CAMERA
User Manual
PNM-7082RVD
PNM-12082RVD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PNM-7082RVD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wisenet PNM-7082RVD

Summary of Contents for Wisenet PNM-7082RVD

  • Page 1 NETWORK CAMERA User Manual PNM-7082RVD PNM-12082RVD...
  • Page 2 Network Camera User Manual Copyright ©2022 Co., Ltd. All rights reserved. Hanwha Techwin Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
  • Page 3 16. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2” EXPLANATION OF GRAPHICAL SYMBOLS and rated from PoE, 0.32A. (PNM-7082RVD) 17. This product is intended to be supplied by isolation power.
  • Page 4 overview Class construction Please read the following recommended safety precautions carefully. An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a ~ Do not place this apparatus on an uneven surface. protective earthing connection. ~ Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area.

  • Page 5: Table Of Contents

    CONTENTS OVERVIEW Important Safety Instructions WEB VIEWER Connecting to the Camera Recommended PC Specifications Password setting Recommended Micro SD/SDHC/SDXC Login Memory Card Specifications Camera Web Viewer Setup NAS recommended specs What’s Included Network I/O box - separately sold product Optional Accessories for Installation At a Glance APPENDIX Troubleshooting...

  • Page 6: Recommended Pc Specifications

    overview RECOMMENDED PC SPECIFICATIONS NAS RECOMMENDED SPECS ~ CPU : Intel(R) Core(TM) i7 3.4 GHz or higher ~ Recommended capacity : 200GB or higher is recommended. ~ RAM : 8G or higher ~ For this camera, you are recommended to use a NAS with the following manufacturer’s specs. ~ Recommended browser: Chrome Recommended products : QNAP NAS, Synology NAS ~ Supported browsers: Chrome, Safari, Firefox, MS Edge(chromium based)

  • Page 7: What's Included

    WHAT’S INCLUDED NETWORK I/O BOX - SEPARATELY SOLD PRODUCT Please check if your camera and accessories are all included in the product package. Appearance Item Name Description Model Name (As for each sales country, accessories are not the same.) Appearance Item Name Quantity Description...
  • Page 8 overview AT A GLANCE Components (Front Side) Appearance Item Description Illumination Sensor Detects incoming light to control the IR LED. Lens 2 camera lenses show different directions. The button restores all camera settings to the factory default. Item Description Press and hold for about 5 seconds to reboot the system. Dome cover Case cover used to protect the lens and the main unit.
  • Page 9 Components (Rear Side) Item Description These infrared LED’s are controlled by the illumination sensor. IR LED Micro SD card slot Compartment for the Micro SD card. PoE+ port This port connects power and network via PoE+ injector. English _9...

  • Page 10: Installation & Connection

    installation & connection INSTALLATION 2. Loosen the fastening screw on the camera body. You don’t have to completely remove the screws. This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
  • Page 11 Inserting a Micro SD card Removing a Micro SD card Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD 1. Remove the dome cover of the camera. card from the slot.
  • Page 12 installation & connection Installation (mount plate) When connecting the cable through the side, remove the wiring hole cover first before doing so. [Directly installing on wall/ceiling] 1-1. Attach the installation template on the desired surface and drill holes for screws and cables. 1-2.
  • Page 13 [Installing using pipe] 2-3. Place the pipe on the mount plate. 2-4. Fix the mount plate using appropriate screws. 2-1. Attach the installation template and drill holes for screws and cables. 2-2. Separate the pipe cover of the mount plate by pressing its sides. 2-5.
  • Page 14 installation & connection [Installation using the mount] Installation (camera body and dome cover) The camera can also be installed on other mounts using the product-specific mount (hanging mount). 1. Pull out the cable bushings from the camera body. 3-1. Attach the hanging mount to the wall mount. Both the hanging mount and wall mount are sold separately.
  • Page 15 2-3. Mount the cable bushing to the camera body. 3. Using the fastening screws on the camera body, fix the camera body to the mount plate. TR20 4. Adjust the lens to the desired direction by referring to “Adjusting the monitoring direction for the camera”.
  • Page 16 installation & connection 5. Assemble the dome cover. [Using Weather cap] When assembling the dome cover, align the pipe cover part to assemble it. You can install it after purchasing a separately sold weather cam. Make sure to firmly tighten the fastening screws so that there is no water damage issue. 1.
  • Page 17 Outdoor installation Adjusting the monitoring direction for the camera When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be purchased in stores) so that water does not leak from the gap of the cable connected to the outside. 1.

  • Page 18: Connecting With Other Device

    installation & connection Installation precautions when using the IR mode CONNECTING WITH OTHER DEVICE ~ <Auto1>: Optimized to evenly radiate IR light when generally mounting the camera on the wall. WiFi dongle ~ <Auto2>: Optimized to evenly radiate IR light when generally mounting the camera on the ceiling. ~ <Manual>: You can assign an appropriate IR LED area based on the direction the camera faces.
  • Page 19 1. Connect OTG adapter (5-pin) and WiFi dongle to the micro USB port. Connector RJ45 (10/100/1000BASE-T) Smartphone Setup Ethernet 10/100/1000BASE-T 1. Install the Wisenet Installation application. Cable Category 6 2. Select the camera SSID after turning on the WiFi. 3. Run the Wisenet Installation application. Max Distance 100 m DC Resistance ≤...
  • Page 20 installation & connection Connecting audio and alarm I/O You can connect audio and alarm using a network I/O box separately sold. Microphone Network Speaker <SPM-4210> Alarm Sensor (Warning lamp) For more information on the network I/O box, see the manual for the network I/O box. You can set the network I/O box in Camera web viewer <Setup ( )>...

  • Page 21: Network Connection And Setup

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE You can set up the network settings according to your network configurations. MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET 1.

  • Page 22: Using Device Manager

    network connection and setup USING DEVICE MANAGER If using a Broadband Router ~ IP Address : Enter an address falling in the IP range provided by the Broadband Router. Device manager program can be downloaded from <Technical Support>-<Online Tool> menu at Hanwha Techwin website ex) 192.168.1.2~254, 192.168.0.2~254, (http://www.hanwha-security.com).

  • Page 23: Manually Registering Camera

    ~ Example of the Dynamic IP environment configure the IP. PNM-7082RVD - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 2. Click < + > at the main page of device manager.

  • Page 24: Port Range Forward (Port Mapping) Setup

    Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play) function. For more information, refer to the user manual of the applicable router. After connecting the network camera, select the checkbox from the menu <Quick connect> in <Wisenet DDNS> in “Settings -> Network -> DDNS”.

  • Page 25: Connecting To The Camera From A Shared Local Pc

    2. From the remote PC, launch the Internet browser and type the DDNS URL address of the camera, or the IP address of the Broadband Router in the address bar. ex) http://ddns.hanwha-security.com/ID To use Wisenet DDNS, sign up at the Wisenet DDNS homepage (http://ddns.hanwha-security.com) and register the product at [My DDNS]>[Register Product]. English _25...

  • Page 26: Connecting To The Camera

    To register your device to the <DDNS> server, visit http://ddns.hanwha-security.com and register your device 1. Launch the Internet browser. first, and then set the Web Viewer’s <Network> - <DDNS> to <Wisenet DDNS>, as well as providing <Product ID> that had been used for DDNS registration.

  • Page 27: Password Setting

    PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, audio, network, event, analysis, and For a new password with 8 to 9 digits, you must use at least 3 of system over the network.

  • Page 28: Troubleshooting

    appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION No signal is found at the Alarm Output ~ On the authentication popup window prompted when initially accessing https, click "View port even when an intelligent video ~ Check alarm output port settings. Authentication Certificate" and select the "Always trust when connecting to the designated No video is displayed when accessing analysis event is generated.
  • Page 29 Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

Pnm-12082rvd

Table of Contents