Using Caller Id; Responding To Call Waiting - Sanyo SCP-2300 User Manual

Using Caller ID

Caller ID allows people to identify a caller before answering the phone
by displaying the number of the incoming call. If you do not want your
number displayed when you place a call, just follow these easy steps.
To block your phone number from being displayed for a specific
outgoing call:
1.
Press
2.
Enter the number you want to call.
3.
Press
To permanently block your number, call Qwest Wireless
at 1-888-879-0611.

Responding to Call Waiting

When you're on a call, Call Waiting alerts you of incoming calls by
sounding one beep. Your phone's screen informs you that another
call is coming in and displays the caller's phone number. (This feature
may not be available while you are in analog area.)
To respond to an incoming call while you're on a call:
Press
press
second call.)
To switch back to the first caller:
Press
Flash, and press
To respond to an incoming call when Answer on Hold is activated:
Press
press
(The Answer on Hold will be automatically deactivated. See
page 25 for Answer on Hold.)
To switch back to the first caller:
Press
Flash and press
Tip:
For those calls where you don't want to be interrupted, you can temporarily
disable Call Waiting by pressing
Call Waiting is automatically reactivated once you end the call.
Section 3A: Qwest Service Features – The Basics
.
or
.
(or press Options [right softkey], highlight Flash, and
). (This puts the first caller on hold and answers the
again (or press Options [right softkey], highlight
).
(or press Options [right softkey], highlight Flash, and
).
again (or press Options [right softkey], highlight
).
TM
before placing your call.
Repair
162