Mp3(Wma)-Cd Playback; Skip/Search Function - Samsung yePP MCD-CF550 Instruction Manual

MP3(WMA)-CD Playback

1
Slide the OPEN button to
open the door, and insert
an MP3(WMA)-CD.
• Push the door to close it.
2
Press the SEL key to the
√» position.
• The inserted MP3(WMA)-CD
will be scanned for about
30~90 seconds. Playback will
then commence.
Your CD Player will take a
few moments to scan through
all the tracks and the sessions
recorded on a MP3(WMA)-CD.
3
To stop playback, press the SEL
key to the position.
• Press and hold the SEL key to the
position to switch off the unit.
Note • If a music file is corrupted and a particular section cannot be read, only
that section will be skipped. But if the file continues to be unreadable,
the player will skip to the next file.
• Files that do not conform to specifications (refer to P. 34) will be skipped.
•
When the OPEN switch is slid to open the door, playback will stop.
•
The quality of MP3(WMA)-CD playback may vary depending on the condition of the
disc containing the music files or the condition of the recorder with which the disc
was created.
• If different types of files or unnecessary folders are on the same disc, you will have
13
problems with playback.
Playtime
indicator
DIR
0:03:15 FLAT NOR
Number
indicator
001 Boyz II MEN
DIR Name indicator
001 End [Boyz II MEN]
Track
Title indicator
Number
128 kbps
L
L/R Channel
indicator
44KHz
R
Level Indicator
Bit rate indicator
Sampling Frequency
Indicator

Skip/Search function

Skip
Press the SEL key to the left or right.
(Slide the Iî or ïI to the left or right on the
main unit.)
• Press the SEL key to the ïI position to play the next track.
Press the SEL key to the Iî position to go back to the
beginning of the current track. (Press the SEL key to the
Iî position twice to repeat the previous track).
• Press the SEL key to the ïI position while the unit is in
"Stop" (no playback) mode. Track 2 will be played back.
Press the SEL key to the Iî position to play back the
previous song.
Search
Press and hold the SEL key to the left or
right during playback of a CD.
• Press and hold the SEL key to the left or right.
The CD will play back in fast forward or fast reverse
mode.
• Release the key to return to normal playback mode.
HOLD function
• Buttons pressed during CD playback will not function.
• Use the HOLD function when carrying your CD Player around with you.
Use of this function will allow you to conserve battery life as it prevents
the CD Player from being turned on if a button is pressed unintentionally.
• The remote control will still operate while the HOLD function on the main
unit is active. (On the display, the "HOLD" indicator will be displayed.)
• The main unit will still operate while the HOLD function on the remote
control is active.(On the display, the " " indicator will be displayed.)
Main Unit
Remote Control
Bottom of the Main Unit
14