Program Function - Samsung VCD-320M Owner's Instructions Manual

V320/340/360M 5/8/03 1:19 AM

PROGRAM FUNCTION

This function can program up to 30 tracks during STOP mode.
•
ex) To program No.4 track of No.2 disc
1
Press the PROGRAM button.
PROGRAM
2
Select the disc by pressing the
DISC CHANGE button.
•
Press the DISC CHANGE button.
3
Press the track number to
be programmed.
•
Press the digit buttons.
Ex) Select track 4
Page 15
PROGRAM
P : 01 D1 - 000
DISC CHANGE
4
PROGRAM
P : 01 D2 - 004
4
In a second
•
After step 3, you must press the PROGRAM
button again then the selected number (2-04)
is programmed.
•
Up to 30 tracks can be programmed by
repeating step 2 to 4.
PROGRAM
5
Press the PLAY/PAUSE button.
•
Programming is completed, and the first track
of the program is played.
•
When the PREVIOUS/NEXT button is pressed, the
next or previous programmed track is played.
NOTE
•
If the PROGRAM button is pressed during programming, it
can not be programmed anymore, press again to continue.
•
To escape program function, Press the OPEN/CLOSE
button, or press the STOP button two times.
PROGRAM
P : 02 D2 - 000
SELECT
15