KidKraft 14562C Assembly Instructions

© 2009 KidKraft, LP
Please retain this information for future reference

HARDWARE:

A. Bolt x 8 pcs
Allen Wrench x 1 pc
(65 mm, 2 1/2 in.)
Wrench x 1 pc
B. Screw x 2 pcs
The following tool
is required for
(30 mm, 1 3/16 in.)
assembly (not
included):
C. Washer x 2 pcs
®
Phillips Screwdriver
D. Cross Dowel Nut
x 8 pc
WARNING:
ADULT ASSEMBLY REQUIRED.
Product includes small parts with potentially hazardous sharp points and
sharp edges in the unassembled state. Keep unassembled parts away from
children.
-Do not allow children to play inside with lid closed. In certain
situations, sufficient air may not be available for breathing.
Nantucket Toy Box
Assembly Instructions

PARTS LIST:

1
4

USE AND MAINTENANCE:

CHOKING HAZARD. Small parts
-Use on level surfaces only
-Please check assembly at regular intervals, and and sharp points, not suitable for
children under 3 years.
frequently tighten hardware if necessary. If
maintenance is not carried out, the product
could cease to function properly.
5
WARNING: IMPORTANT:
Lid Support mechanism must be installed
properly (Step 4) or a head/neck entrapment may exist.
Check to make sure the Lid Support is properly installed
by moving it back and forth. When you let go of the lid it
should stop, not fall or slam shut.
To order replacement parts, please visit www.kidkraft.com
2
IMPORTANT! DO NOT
TIGHTEN SCREWS OR
BOLTS UNTIL COMPLETELY
ASSEMBLED.
Item # 14562C
3
6
Customer Service
1-800-933-0771
www.kidkraft.com
1