Setting The Channel - Samsung SyncMaster 211MP Owner's Instructions Manual

BN68-00169C-00_NTSC ENG

Setting the Channel

Main Menu
16
2/5/02 3:41 PM Page 16
Adjusting Your LCD TV/Monitor
Sub-Menus
Channel
à ¨
Ant/CATV Ant
¨
Auto Program
à ¨
Fine Tune 00
Add/Erase : Erased
LNA : Off
Move Select Exit
Channel auto program does not work when the V-Chip function is active.
Channel
à ¨
Ant/CATV Ant
¨
Auto Program
à ¨
Fine Tune 00
Add/Erase : Erased
LNA : Off
Move Select Exit
Channel
à ¨
Ant/CATV Ant
¨
Auto Program
à ¨
Fine Tune 00
Add/Erase : Erased
LNA : Off
Move Adjust Exit
Channel
à ¨
Ant/CATV Ant
¨
Auto Program
à ¨
Fine Tune 00
Add/Erase : Erased
LNA : Off
Move Select Exit
You can do easily by pressing the ADD/ERASE button on the remote control.
Function Descriptions
Selecting the Video Signal Source
Before begin memorizing the available channels,
you must specify the type of signal source that is
connected to the your LCD TV/Monitor.
Press the - or + button to select Ant (antenna) or CATV
(cable system).
Memorizing the Channels Automatically
Your LCD TV/Monitor can memorize and store all of the
available channels found automatically for both "off-
air" (antenna) and cable channels.
Press the - or + button, and then begin memorizing all
of the available channels with the horizontal bar is
displayed.
Fine tuning Channel Reception
If the reception is clear, you do not have to fine-tune
the channel, as this is done automatically during the
memorize and store operation.
If however the signal is weak or distorted, you may
have to fine-tune the channel.
Skipping Unwanted Channels
You can exclude the channels of your choice from the
channel scan operation. when you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically
choose to skip are displayed during scanning.
continued...