1. Manuals
  2. Brands
  3. Ruida Technology Manuals
  4. Control Systems
  5. RDC6555G
  6. User manual

Ruida Technology RDC6555G User Manual

Precision laser cutting control system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Precision Laser cutting control system user manual
Shenzhen Ruida Technology Co., Ltd
Address: 202-203,B-Block,Technology Building, 1057
Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
Tel:
0755--26066687
Fax:
0755--26982287
E-mail:
sales@rd-acs.com
Web:
www.rd-acs.com
Read this manual before operation
➢
The content includes of electric connections and operating
steps
➢
Read the manual to operate the systems
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
RDC6555G Precision Laser cutting control system user manual
RDC6555G
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RDC6555G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ruida Technology RDC6555G

Summary of Contents for Ruida Technology RDC6555G

  • Page 1 RDC6555G Precision Laser cutting control system user manual Read this manual before operation ➢ The content includes of electric connections and operating steps ➢ Read the manual to operate the systems RDC6555G Precision Laser cutting control system user manual Shenzhen Ruida Technology Co., Ltd...
  • Page 2 The loss caused by natural forces makes the machine in motion dangerous, the user is responsible for designing an effective error handling and safety protection mechanism in the machine, and Ruida Technology has no obligation or responsibility to be responsible for the consequential or corresponding losses caused by it.
  • Page 3 RDC6555G Precision Laser cutting control system user manual CERTIFICATION STATEMENT CE Certification statement This product has passed the European Union CE (CONFORMITE EUROPEENNE) safety certification, has passed the corresponding conformity assessment procedures and the manufacturer's declaration of conformity, and complies with the relevant EU directives.
  • Page 4 RDC6555G Precision Laser cutting control system user manual SAFETY INFORMATION Please make sure that the operation is correct and the method is safe when using the system. Some signs or words will be used to remind you of dangerous matters and some important information.
  • Page 5 RDC6555G Precision Laser cutting control system user manual attention to safety. Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 6 If you find that the parts are missing or the parts are damaged, please contact Ruida immediately. RDC6555G control system shipping list is shown in the following table: (due to the continuous updating of the product, the accessories received may be different from this manual)

  • Page 7: Table Of Contents

    RDC6555G Precision Laser cutting control system user manual Contents Chapter 1 Overview ....................... 错误!未定义书签。 Introduction ..................... 错误!未定义书签。 1.2 Controller Model Description ................. 错误!未定义书签。 Chapter 2 Mounting Dimensions ................... 错误!未定义书签。 Mainboard Mounting Dimensions ..............错误!未定义书签。 Panel Mounting Dimensions ................错误!未定义书签。 Chapter 3 Overview of physical maps and interfaces ............ 错误!未定义书签。...
  • Page 8 RDC6555G Precision Laser cutting control system user manual Laser On Test ....................错误!未定义书签。 Cutting test ..................... 错误!未定义书签。 Charpter 6 Alarm Information Description ..............错误!未定义书签。 Alarm Information Description ..............错误!未定义书签。 System Error ....................错误!未定义书签。 Limit Trigger ....................错误!未定义书签。 Reset Error ..................... 错误!未定义书签。...

  • Page 9: Chapter 1 Overview

    RDC6555G Precision Laser cutting control system user manual Chapter 1 Overview This chapter includes: Introduction Controller Model Description Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...

  • Page 10: Introduction

    RDC6555G Precision Laser cutting control system user manual 1.1 Introduction RDC6555G is a new generation laser control system developed by Ruida Technology. The control system has better hardware stability, richer motion control solutions, and better anti-high voltage, anti-static features. The man-machine operating system based on 5-inch LCD has a more friendly operation interface and more powerful functions.

  • Page 11: Controller Model Description

    RDC6555G Precision Laser cutting control system user manual 1.2 Controller Model Description General hardware version Five-inch LCD Five-axis card The number of hardware subversion The 6th generation hardware platform of this series Laser cutting product Ruida Technology Company RD: Ruida Technology Company...
  • Page 12 RDC6555G Precision Laser cutting control system user manual Chapter 2 Mounting Dimensions This chapter includes: Mainboard Mounting Dimensions Panel Mounting Dimensions Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...

  • Page 13: Mainboard Mounting Dimensions

    RDC6555G Precision Laser cutting control system user manual 2.1 Mainboard Mounting Dimensions All dimensions are in mm. Figure 2.1.1 Vertical View Figure 2.1.2 Front View Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 14 RDC6555G Precision Laser cutting control system user manual Figure 2.1.3 Left View Figure 2.1.4 Back View Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 15 RDC6555G Precision Laser cutting control system user manual Panel Mounting Dimension All dimensions are in mm. Figure 2.2.1 Front View Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 16 RDC6555G Precision Laser cutting control system user manual Figure 2.2.2 Back View Figure 2.2.3 Side View Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 17 RDC6555G Precision Laser cutting control system user manual Chapter 3 Overview of Physical pictures and Interfaces This chapter includes: System wiring diagram Hardware interface instructions Motor wiring instructions Laser source wiring instructions Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...

  • Page 18: Hardware Interface Diagram

    RDC6555G Precision Laser cutting control system user manual Hardware interface diagram External start/pause 、 Working status、Blow、 Reserved output interface protection input interface Vacu output interface PGND High power DC Power Tricolor light、Alarm Reserved input Limit,Origin high frequency +24V interface output interface...
  • Page 19 RDC6555G Precision Laser cutting control system user manual 3.3 Limit, Origin switch interface CN2, CN3, CN4 Signal Definitions LmX+ X-axis positive limit LmX- X-axis negative limit LmY1+ Y1-axis positive limit LmY1- Y1-aixs negative limit LmY2+ Y2-axis positive limit LmY2- Y2-axis negative limit...

  • Page 20: Input Interface Cn5, Cn6

    RDC6555G Precision Laser cutting control system user manual each limit light up, the limit polarity is negative at this moment; on the contrary, if the motion axis is close to the limit position, the corresponding indicator light off, and the corresponding indicator lights up when leaving the limit, the limit polarity is positive.

  • Page 21: Output Interface Cn7, Cn8, Cn9

    RDC6555G Precision Laser cutting control system user manual 3.5 Output interface CN7, CN8, CN9 Signal Definitions Status Working status output interface, OC output, maximum support 100mA current Blow Blow control output interface, OC output, maximum supports 100mA current Vacu Vacuum adsorption output control interface, OC output,...

  • Page 22: High Power High Frequency Signal Output Interface Cn10

    RDC6555G Precision Laser cutting control system user manual Out2 Shutter control output interface, OC output, maximum supports 100mA current Out3 Reserved output interface, OC output, maximum supports 100mA current Out4 Reserved output interface, OC output, maximum supports 100mA current 24V power supply output interface 1.Here the output interfaces are low voltage effective, with a maximum current of 100mA,...
  • Page 23 RDC6555G Precision Laser cutting control system user manual The high-power high-frequency interface adopts OC output, which can support large-current drive and can drive solenoid valves for connection. Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...

  • Page 24: Five-Axis Drive Interface

    RDC6555G Precision Laser cutting control system user manual 3.7 Five-axis drive interface Five motion axis interfaces are the same. Take the X-axis interface as an example. Signal Definitions Encoder B negative phase Encoder A positive phase Pul- Pulse signal negative phase...
  • Page 25 RDC6555G Precision Laser cutting control system user manual 2.If connecting to a servo motor, please correctly set the servo drive parameters according to the servo drive model. Panasonic AC Servo Driver Connection ASDA AC Servo Driver Connection MINAS A6 Series...
  • Page 26 RDC6555G Precision Laser cutting control system user manual 3.8 Laser source control signal interface HSIO Signal Definitions 5V power supply output interface Ena- Laser enable negative interface, TTL level L_ON+ Laser source control positive interface, TTL level PWM+ Laser source modulation signal positive interface, TTL level...

  • Page 27: Ethernet Interface

    RDC6555G Precision Laser cutting control system user manual 3.9 Serial communication interface COM Signal Definitions First extended peripheral interconnection interface transmission The first extended peripheral interconnection interface reception The second extended peripheral interconnection interface transmission The Second extended peripheral interconnection interface...

  • Page 28: Chapter 4 Hmi Function Introduction

    RDC6555G Precision Laser cutting control system user manual Chapter 4 HMI Function Introduction This chapter includes: HMI function introduction HMI operation introduction Parameter Description Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 29 RDC6555G Precision Laser cutting control system user manual Introduction RDC6555G-HMI panel (hereinafter referred to as “Panel”) is a human-machine operation interface based on 5.0” TFT LCD screen, with beautiful interface and friendly human-machine. The panel can describe the motion track of the controller in real time, support real-time position and real-time speed display. Users can clearly understand the current processing status.

  • Page 30: Button Function Introduction

    RDC6555G Precision Laser cutting control system user manual ⚫ 854*480 resolution ratio ⚫ 64K color ⚫ RS232 standard serial communication ⚫ Buzzer Button function introduction Button pics Functions System hardware reset Start working or pause Stop processing or motor axis movement Memory file and U disk file management User parameters, factory parameters, language settings, etc.
  • Page 31 RDC6555G Precision Laser cutting control system user manual Auto focus Set positioning point Frame operation on current processing file Set the current button speed fast/slow Quick access to system diagnostic interface Blow interface control button Vacuum interface control button return to the upper menu, cancel parameter settings, etc.

  • Page 32: Main Interface Function

    RDC6555G Precision Laser cutting control system user manual For moving the Z-axis For moving the U-axis Switch between jog movement and continuous movement Used to set parameters with decimals Used to delete parameters Number 0~9 Used to set parameters Main interface functions The main interface will be displayed when the system is powered on and reset.
  • Page 33 RDC6555G Precision Laser cutting control system user manual ⚫ Graphic display area: this area is used for file preview and for drawing the processed file image during processing. ⚫ Coordinate display area: Display system coordinates, speed and power in real-time ⚫...
  • Page 34 RDC6555G Precision Laser cutting control system user manual Files 4.4.1 Memory file Press the [File] button on the panel to enter the file management interface 12.3 45.6 SP: 0mm/s 65535 99:59:59 Figure 4.4.1 When entering this interface, the controller will read the memory file of the system automatically, the file name and number of processed pieces will be displayed on the list, and the selected file will be previewed in the preview area on the right.
  • Page 35 RDC6555G Precision Laser cutting control system user manual Clear the number of Clear the number of processed pieces of the selected file pieces Copy to U disk Copy the file to U disk Delete files Delete the file U disk files...
  • Page 36 RDC6555G Precision Laser cutting control system user manual 12.3 45.6 SP: 0mm/s 200mm/s 2.0%/5.0K 200mm/s 2.0%/5.0K 200mm/s 2.0%/5.0K 200mm/s 2.0%/5.0K 65535 99:59:59 Figure 4.4.2-2 Then user can press the up and down keys to select the layer number, the “selection box” will move as well.
  • Page 37 RDC6555G Precision Laser cutting control system user manual save the current layer parameters, the current parameters take active, otherwise the parameters are not saved. Press [ESC] key returns to the main interface. 4.4.3 Memory operation Select “memory operation” item in the above interface, press [ENT] key and the pop-up menu is as shown below: 12.3...

  • Page 38: File

    RDC6555G Precision Laser cutting control system user manual 12.3 45.6 SP: 0mm/s 65535 99:59:59 Figure 4.4.3-2 4.4.4 U disk file Select [U disk+] item from [File] interface, press [ENT] to pop up U disk file list. The operation method is the same as the memory file.

  • Page 39: Menu

    RDC6555G Precision Laser cutting control system user manual This system supports FAT32 and FAT16 file formats of the U disk. Files must be placed in the root directory of the U disk to be recognized by the system. File names exceeding 8 characters will be automatically cut off by the system.
  • Page 40 RDC6555G Precision Laser cutting control system user manual Figure 4.5.1-1 When entering the user setting, the panel will automatically read and display the mainboard parameters. After all the parameters are read, user can select the parameters by pressing the [Up/Down] key to move the red cursor, such as [Key para], [Frame para], etc.
  • Page 41 RDC6555G Precision Laser cutting control system user manual [Write] option with the arrow keys, and then press the [ENT] from the panel. Other interface operations are similar, the interface display is as below: Cut para X key fast : 100.000...
  • Page 42 RDC6555G Precision Laser cutting control system user manual After the machine starts processing to the end of processing, all Idle speed motion without laser on is idle motion. This parameter determines the maximum speed of the idle motion. The acceleration of idle motion. Setting the idle motion and idle Idle acc acceleration too large may cause the trajectory to jitter.
  • Page 43 RDC6555G Precision Laser cutting control system user manual speed] U Key fast Refers to the speed of manually moving the U-axis when in [Fast speed] Refers to the speed of manually moving the U-axis when in [Slow U key slow speed] The position where laser head stops after processing.
  • Page 44 RDC6555G Precision Laser cutting control system user manual automatically when the machine is turned on, otherwise it will not be reset automatically. After enabling Z-axis single lifting, it will only be lifted once in the whole processing, and the lifting setting in the layer parameters is...
  • Page 45 RDC6555G Precision Laser cutting control system user manual The time can be set from 0 to 300s, the feeding axis starts to move after the previous work is completed and the value is delayed. Delay before feed During the delay period, it is convenient for users to load and pick the materials on the feeding device.
  • Page 46 RDC6555G Precision Laser cutting control system user manual Taking RF tube as an example, if the same signal is used to control First pulse suppression the laser source output, the first few pulse actual laser on by the starting power laser source have a larger energy, so it needs to suppressed.
  • Page 47 RDC6555G Precision Laser cutting control system user manual Axis opposite direction. The purpose of modification is to make the axis move to the origin when reset. If the axis moves away from the origin when reset, it means that the axis direction polarity setting is wrong and should be modified.
  • Page 48 RDC6555G Precision Laser cutting control system user manual the machine can cut a larger rectangle (larger graphics can make the error smaller), and automatically calculate the motor step through the graphic length and the measured length. The maximum distance that the motion axis running.depends...
  • Page 49 RDC6555G Precision Laser cutting control system user manual alarms. If the encoder enables, the system hardware connection is Encoder enable considered to be connected the encoder. Encoder polarity Used to set the polarity of the encoder. Set the number of encoder feedback pulses per motor Encoder resolution revolution, which is related to the driver parameter setting.
  • Page 50 RDC6555G Precision Laser cutting control system user manual dual-drive synchronous alarm is forbidden, protection will not be generated when the Y-axis misaligned. If the dual-drive synchronous alarm is enabled, protection will Dual-drive be generated when the Y-axis dual-drive misalignment synchronization error deviation is greater than the dual-drive synchronization error.
  • Page 51 RDC6555G Precision Laser cutting control system user manual be input continuously from the outside to the corresponding hardware interface, otherwise it cannot be processed and an alarm will be prompted. When enabling this signal, a low voltage signal is required to...
  • Page 52 RDC6555G Precision Laser cutting control system user manual Whether to enable the Y-axis pressing rod control, check if it is enabled. When the Y-axis pressing rod control is checked, you Material-pressing control enable can select whether the absolute origin of the machine is above or below the machine table.
  • Page 53 RDC6555G Precision Laser cutting control system user manual 4.5.3 Language settings Select [Controller settings] item and press [ENT], select [Language+] item and press [ENT] to set the panel operation language. 12.3 45.6 12.3 45.6 SP: 0mm/s SP: 0mm/s 65535 99:59:59...
  • Page 54 RDC6555G Precision Laser cutting control system user manual 12.3 45.6 12.3 45.6 SP: 0mm/s SP: 0mm/s 65535 99:59:59 65535 99:59:59 Figure 4.5.4 4.5.5 Coordinate display configuration Press [Controller settings] item and then [ENT], select [Coor display conf] item and press [ENT] to set the system coordinate display source.

  • Page 55: Function

    RDC6555G Precision Laser cutting control system user manual 12.3 45.6 12.3 45.6 SP: 0mm/s SP: 0mm/s 65535 99:59:59 65535 99:59:59 Figure 4.5.7 4.5.7 System information Select [controller settings] item and press [ENT], select [System info+] item and press [ENT] to view the system information.
  • Page 56 RDC6555G Precision Laser cutting control system user manual 12.3 45.6 12.3 45.6 SP: 0mm/s SP: 0mm/s 65535 99:59:59 65535 99:59:59 Figure 4.6.1 4.6.2 Keyboard lock+ 12.3 45.6 12.3 45.6 SP: 0mm/s SP: 0mm/s 65535 99:59:59 65535 99:59:59 Figure 4.6.2 Item Instructions 。...
  • Page 57 RDC6555G Precision Laser cutting control system user manual 4.6.3 Manual set+ Press [Menu] on the panel and select [Function+], press the [ENT] and select [Manual set+] to enter the parameter configuration page, as shown in the figure: 12.3 45.6 12.3 45.6...
  • Page 58 RDC6555G Precision Laser cutting control system user manual Target coordinate Set the target X to be moved to Target coordinate Set the target Y to be moved to Move to target Move to the target coordinate position set by the parameter position 4.6.4 Laser set+...
  • Page 59 RDC6555G Precision Laser cutting control system user manual time and automatically stops each time the [pulse] key is pressed, the duration is equal to the laser time value set by the user. Manual Duty cycle of laser on signal power...
  • Page 60 RDC6555G Precision Laser cutting control system user manual Figure 4.6.5 4.6.6 Alarm record+ Press the [Menu] key on the panel and then select [Function+], press the [ENT] key and then select [Alarm record+] to access alarm record page, in which you can check the abnormal conditions of the alarm. Use the arrow keys to turn the page, if you press the [ENT] key again, some alarms will be processed, as shown in the figure: 12.3...

  • Page 61: Speed

    RDC6555G Precision Laser cutting control system user manual When the machine leaves the factory, use the function of [Set factory para] to back up all the manufacturer parameters and user parameters that have been debugged, and then at any time, user can use [Set default para] to restore all manufacturer and user parameters with one key.

  • Page 62: Power

    RDC6555G Precision Laser cutting control system user manual At this time, you can press the numeric key and the delete key to set and modify the parameters. Press the [ENT] key to save the parameters after modification, and press the [ESC] key to cancel parameters modification. The interface disappears and returns to the main interface.

  • Page 63: Focus

    RDC6555G Precision Laser cutting control system user manual The “red selection box” stays on the first parameter to indicate that the parameter is selected. Press the numerical keys and delete key to set and modify the parameters. Press the arrow keys to move the “selection block”...

  • Page 64: Diagnose

    RDC6555G Precision Laser cutting control system user manual [Fast/Slow] key first, and then press the arrow key to move. Only one speed can be selected to each movement. Pressing the [Fast/Slow] key after the slow movement has started cannot change the movement speed to fast. In the same way, when the fast movement has begun, releasing the fast key cannot change the movement speed to slow.
  • Page 65 RDC6555G Precision Laser cutting control system user manual Chapter 5 System Debug This chapter includes: XY axis Motion Test Instructions Laser Test Instructions Processing Tests Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 66 RDC6555G Precision Laser cutting control system user manual X,Y axis motion debug Be careful when it running for the first time, please follow the steps below to debug: 1. Before connecting the motor driver, please set the manufacturer parameters, user parameters of the mainboard correctly, especially the parameters such as motion speed, motor step, motion distance and so on, to avoid unsafe motion caused by unreasonable parameter settings.

  • Page 67: Cutting Test

    RDC6555G Precision Laser cutting control system user manual 7.Test whether the X,Y axis steps are set correctly. For details, please refer to the manufacturer parameter instructions. 8.When the system uses a servo driver, the encoder polarity, encoder resolution and lead are required to be tested.
  • Page 68 RDC6555G Precision Laser cutting control system user manual Before the cutting test, please make sure the wiring is correct and the controller parameters are set correctly. X, Y shafts motion and laser source light emitting test are normal, and have been successfully reset. The use of related software is only briefly introduced here.
  • Page 69 RDC6555G Precision Laser cutting control system user manual 3.Set layer parameters correctly: 4.Laser test First set the laser parameters correctly, then use the [Vacuum] button to observe whether the fan is normal, and then use the [pulse] button to test whether the laser is emitted normally.
  • Page 70 RDC6555G Precision Laser cutting control system user manual 6.Start cutting When each function test is normal, press the [Start] button on the software interface to start cutting, press the [Stop] button to stop processing. Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 71 RDC6555G Precision Laser cutting control system user manual Chapter 6 Alarm Information Instructions This chapter includes: Alarm Information Instructions Alarm Processing Method Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...

  • Page 72: System Error

    RDC6555G Precision Laser cutting control system user manual Alarm information instructions During the operation of the mainboard, an alarm may be generated when an abnormal situation is encountered, and corresponding protection actions will be generated to protect the machine. Alarm information includes system error, limit trigger, reset error, follow deviation alarm, servo alarm, cover-opening protection, grating protection, etc.

  • Page 73: Reset Error

    RDC6555G Precision Laser cutting control system user manual Reset error When the reset motion is executed, the motor does not move or the motion speed is too slow, resulting in timeout exit. Please set the parameters correctly to ensure that the shaft motion can run normally.

  • Page 74: Mainboard Communication Failure

    RDC6555G Precision Laser cutting control system user manual ⚫ Servo alarm signal level logic of the servo driver is incorrect. The high level must be output when the servo driver alarms. If it is low level, please convert the level to high level by a relay or other means.
  • Page 75 RDC6555G Precision Laser cutting control system user manual ⚫ The connection cable between the panel and the mainboard is connected incorrectly. ⚫ The connection cable terminal between the panel and the mainboard is not in firm contact. Please check whether the connection cable is stable.

  • Page 76: Usb Drive Installation

    RDC6555G Precision Laser cutting control system user manual Chapter 7 Device Connection This chapter includes: USB driver installation USB device connection Ethernet device connection Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA...
  • Page 77 The steps of USB driver automatic installation are as follows: Install software LSWorks . The specific installation steps are as follows: 1.Download the LSWorks software installation package from the website of Ruida Technology http://www.rd-acs.com/, and unzip the installation package file.

  • Page 78: Ethernet Device Connection

    RDC6555G Precision Laser cutting control system user manual 3.After installing the LSWorks software, click the [Start] icon on the computer desktop, find the LSWorks software in all programs, and click the LSUsbDriver software in the directory to start installing the USB driver...
  • Page 79 RDC6555G Precision Laser cutting control system user manual 3.After setting the IP address correctly, click the [Test] button to show the connection is successful. If the connection failure, please check the network cable. If the network cable is connected correctly while the connection still failure, please modify different IP addresses and connect again.
  • Page 80 RDC6555G Precision Laser cutting control system user manual Panel settings When using the network connection, user can modify the network IP address and gateway on the panel. The IP address is 192.168.1.XXX, where XXX represents any number in the range of 2 to 254. Generally, the gateway does not need to be set.
  • Page 81 Thank you for using Shenzhen Ruida Technology Co., Ltd. products! All parts of this note, the property rights of the works belong to Shenzhen Ruida Technology Co., Ltd., without the permission of the Company, no unit or individual may reproduce, copy or...

Table of Contents