DGT North America Manual

DGT NA (North America)
1. Start/Stop. The ON/OFF button is on the bottom of the clock.
2. Select Option/mode 20: [20: One time control with delay] With
clock turned on
a. Find mode 20. Press either + or - until "20" is shown.
(The user may hold the + or - key down to advance
repeatedly.)
b. Activate option 20: Press the rightmost button (labeled
with a check mark) once.
3. Enter edit mode. The clock is in edit mode by default. The digits
In edit mode
that are to be modified are blinking on the display.
a) The digit to be modified will blink on the display.
b) Use +/- buttons on the left to modify the digit
c) Use the check mark button on the right to set and
d) Do not set the seconds at the player level. Delay
e) Set times for one player and then move to the

4. Use the following settings

1:30 1:30 Time control #1 (90 minutes)
Accept all other settings by pressing the check button as many
times as needed.
5. Save settings: The clock remembers previous settings. If you
want to change the times, just change the times. The clock will
be in edit mode by default
6. Press the PLAY button in the center to start play
V. Krishnamurthy
Future Use:
advance
will be set in common settings
.00 .00 Seconds
0.05 Delay 5 seconds
Page 1 of 2 2023-06-15