Table of Contents
Advertisement
The Modbus tab helps you validate the readings
You don't need to pair or add the PMC meter, as it will be automatically
detected once the Modbus cable has been correctly wired to the Modbus
inputs of the A6M.
Power factor (PF) should always be in a positive state and not show a
negative sign. You want to see a good range between 0.8 and 1.0 when
sufficient load is present
The Start, Channel and Energy screens are explained in the Onboarding video
© 2023 Wattwatchers Pty Ltd ABN 47 123 010 588
USING THE MODBUS TAB
IN ONBOARDING
0.8–1.0
VALIDATE READINGS
WITH A CLAMP METER
v2.0
Page 8/14
Advertisement
Table of Contents
