Advertisement
Polluno Pro Commuter Electric Bike Installation Guide
When open the bike's carton box, take out E-bike and use tools to cut off the package strings.
1 Install the Handlebar
1.1 Use inner hexagon tool to loosen
the stem cover and don't tighten
all bolts immediately before
adjusting the handlebar in a
property angel and position.
2 Install Front Wheel
2.1 Take out the front fork protector
from the front fork (Please note:
Front fork protector is used to
prevent the forks from
being deformed during transport.
It belongs to the packing material.
You can just throw away this
accessory!)
2.3 Install the front wheel on the fork.
Make sure the fork is attached to
the axle and make sure the disc is
placed in the middle of the brake.
1.2 Then tighten with tool.
2.2 Take out the quick release
from wheel and unscrew
the bolt from the
quick release.
2.4 Insert quick-release axle into
spring and tighten screw
Quick release nut to be at the
same end as the brake.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ESKUTE Polluno Pro
Summary of Contents for ESKUTE Polluno Pro
- Page 1 Polluno Pro Commuter Electric Bike Installation Guide When open the bike's carton box, take out E-bike and use tools to cut off the package strings. 1 Install the Handlebar 1.1 Use inner hexagon tool to loosen the stem cover and don't tighten 1.2 Then tighten with tool.
- Page 2 6 Install Battery Each ESKUTE e-bike comes with two copies of the battery key. Charging the battery on the bike is likely to result in infrequent use of the battery key however, is required for maintenance and repair, so please keep this in mind when you store your Key.
Need help?
Do you have a question about the Polluno Pro and is the answer not in the manual?
Questions and answers