Samsung SCH-a990 Series User Manual page 23

a990.book Page 23 Wednesday, February 22, 2006 4:37 PM
No service indicator:
because you're outside a service area. You cannot make
or receive calls. Wait for a signal or move to an open area
to find a signal. This indicator always appears when you
first turn on your phone and disappears once service is
located.
Dormant
Data Call:
number, this icon flashes until the call connects.
E911:
Global Positioning Service is set to On for location
and 911 calls.
Location On
set to On for emergency calls only.
Bluetooth: Indicates that Bluetooth wireless technology
is active.
Bluetooth Connected: Indicates Bluetooth wireless
technology is active and connected.
Battery Level
When the battery is low, an empty battery icon flashes
and the phone sounds an alert, which indicates your
phone is about to shut down.
TTY
: Indicates that TTY is enabled.
All Sounds Off
incoming calls, and incoming messages. The phone alerts
you by a flashing service LED.
Alarm Only:
alarm sounds.
Vibrate Only
Understanding the Display Screen
Your phone cannot find a signal
: Indicates no incoming or outgoing data.
Indicates a call in progress. When dialing a
:
Global Positioning Service (GPS) for 911 is
: More bars indicate a greater charge.
: The ringer is silenced for all alerts,
Your phone will only ring when the set
: Your phone vibrates upon receiving a call.
Section 2: Understanding Your Phone 23