Table of Contents
Advertisement
a990.book Page 93 Wednesday, February 22, 2006 4:37 PM
Erase All
•
(Inbox, Drafts and Sent).
Changing Message Settings
This menu allows you to define settings for messages sent
or received on your phone. To access your message
settings, use the following steps:
1. In standby mode, press
navigation key to highlight
the left soft key
Message and press the left soft key
2. Select the message type you would like to change and
press
. Choose from the following options:
•
All Msg: Allows you make a broadcast change to all
message settings.
Auto Save
•
keys to select On, Off, or Prompt.
Auto Erase
•
(TXT or PIX/FLIX) when the maximum number of received
messages of that type is exceeded in the Inbox. For example,
the oldest read TXT message is replaced by an incoming TXT
message when 50 TXT messages are stored in the Inbox, and the
oldest read PIX/FLIX message is replaced by an incoming PIX/FLIX
message when 50 PIX/FLIX messages are stored in the Inbox.
Choose from On or Off.
Quick Text
•
Text Msg and PIX/FLIX Msg. Press the right soft key
to add to the Quick Text list. Enter your new text and press
. The new Quick Text item shows in the first position of the
list.
Voice Mail #
•
voicemail.
: Erases unlocked messages in all message folders
MENU, then press the left
MESSAGING, then press
Settings. Or press the left soft key
: Saves all messages sent. Use the navigation
: Erases the oldest message of the same type
: Displays the Quick Text pre-defined entries for
: Enter the speed dial entry set for your
Section 7: Messaging
Changing Message Settings
Settings.
New
93
Advertisement
Table of Contents
