Samsung SCH-a990 Series User Manual page 112

a990.book Page 112 Wednesday, February 22, 2006 4:37 PM
Edit Lock Code
The default lock code is the last four digits of your phone
number. Edit Code allows you to change this code to a lock
code of your preference.
1. In standby mode, press
navigation key to highlight
Press
menus are listed in the display.
2. Press
code. The default lock code is the last four digits of your
telephone number.
3. Press
and Location. Use the navigation keys to highlight your
choice and press
4. At the "Enter New Lock Code" or "Enter Location Lock
Code" prompt, enter the new lock code. You're prompted
to confirm the new lock code.
5. "Device Code Set" or "Location Lock Code Set" message
appears in the display confirming that your lock code has
been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Resetting Your Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press
112
MENU, use the right
SETTINGS & TOOLS.
Phone Settings. The Phone Settings
Security. You're prompted to enter the lock
Edit Code. Two options are available Device
.
MENU, use the right