Page 1
THECUT&DETAIL TOOL TIPS for the 30pc multi-purpose clipper & personal grooming kit. VSM7318A...
Page 2
HEY YOU! TAKE A BOW FINE SIR. THINGS ARE LOOKING UP & YOU’VE JUST MADE A QUALITY PURCHASE WITH THIS NEW GROOMING TOOL. WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
THE CUT & DETAIL / TOOL TIPS IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, especially when children are present, basic safety instructions should always be followed, including the following: Polythene bags over product or package may be dangerous. To avoid danger of suffocation, keep this wrapper away from babies and children.
Page 5
THE CUT & DETAIL / TOOL TIPS IMPORTANT: Always unplug the appliance when not in use or before cleaning. Do not leave unattended when plugged in or switched on. Do not place on any heat sensitive surface. - Do not use any attachments other than those supplied by Conair Australia Pty Ltd.
Page 6
THE CUT & DETAIL / TOOL TIPS THE CUT & DETAIL BRAVO. YOU’VE MADE A QUALITY PURCHASE. The Cut & Detail is the 30pc multi-purpose clipper & personal grooming kit. 14 13 1. Titanium coated blades 5. Left + right ear taper 8.
Page 7
THE CUT & DETAIL / TOOL TIPS PREPPING YOUR NEW TOOL CHARGING The Cut & Detail clipper is so easy to use. But before you start using your new tool, you must take the time to charge it overnight for 16 hours before its first use.
Page 8
THE CUT & DETAIL / TOOL TIPS OILING THE BLADES To get the sharpest, most precise cut, it is highly recommended to oil the blades before each use. Using the oil supplied with your new tool, unscrew the cap & cut off the very end of the plastic tube with a pair of scissors to release the oil.
Page 9
THE CUT & DETAIL / TOOL TIPS HOW TO USE THE CUT & DETAIL BEFORE USING • Always inspect the clipper blades for noticeable signs of damage. • Ensure the clipper blades are well oiled before using. • Always inspect the clipper blades before use to ensure they are free from hair, debris etc.
Page 10
THE CUT & DETAIL / TOOL TIPS EASY CLIPPING, YOUR WAY The Cut & Detail features 8 cutting comb guide from grades #1 – 8 comb guides (3mm to 25mm) for cutting, shaping & fading and left + right ear taper cutting comb guides for the finishing touches around the ears.
Page 11
THE CUT & DETAIL / TOOL TIPS CLIPPING TIPS Hit up www.vsformen.com.au for more grooming tips, inspiration & guidance on how to get the best use of your clipper. CREATING AN ALL-OVER EVEN CUT 1. Ensure the clipper is switched off. 2.
Page 12
THE CUT & DETAIL / TOOL TIPS CREATING A SHORT BACK & SIDES LOOK, WITH LENGTH ON THE TOP 1. Ensure the clipper is switched off. 2. Attach the desired cutting comb guide as required. 3. Switch the clipper on – the blades will start to move. 4.
Page 13
THE CUT & DETAIL / TOOL TIPS OUTLINING 1. To tidy up the edges around your cut e.g. neckline and sideburns, detach the comb guides. 2. Hold the clipper upside down, so the front of the clipper is facing towards your head.
Page 14
THE CUT & DETAIL / TOOL TIPS CLIPPER CLEANING & MAINTENANCE Because the clipper blades are precision made for a very special use, they should always be handled with care. To ensure long-lasting performance of your clipper, it is important to clean the blades + the comb guides after every use. After each use, clean the clipper blade set as follows: 1.
Page 15
THE CUT & DETAIL / TOOL TIPS WORLDWIDE VOLTAGE This appliance has a multi voltage feature for worldwide use. The voltage automatically converts for ease of use from 100v - 240v. This appliance has an automatic internal converter which will automatically convert the voltage without the need of a switch.
THE CUT & DETAIL / TOOL TIPS BATTERY DISPOSAL The Cut & Detail clipper contains a Nickel Metal-Hydrate battery. To protect the environment, the appliance must be disposed of safely at the end of its useful life. Please take the appliance to a recycling centre, where the internal rechargeable battery should be removed by a professional and recycled separately.
THE CUT & DETAIL / TOOL TIPS LIMITED TWO YEAR WARRANTY Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Need help?
Do you have a question about the VSM7318A and is the answer not in the manual?
Questions and answers