Assembly And Use; Care And Maintenance - identités NOSY BE 811011 Instruction Manual

ASSEMBLY AND USE

Setup Instructions
1. Remove frame, seat lid, pail and lid from carton. Allow the sear and lid to reach room temperature if exposed to cold. This will
help prevent the seat and lid clamps from cracking while being assembled onto commode back-frame rail.
2. Align the toilet seat clamps onto the back-frame rail. Push down on seat with both hands until clamps snap firmly into place.
3. To remove the seat, grasp seat and lift firmly.
4. From the front of the frame, slide the bucket (without lid) into the pail backrest under the seat.
5. Attach the back support by depressing the brass push pin and pushing until both are locked securely in place, An audible click
will be heard.
6. The commode is now ready for use.
Adjust commode height
1. Depress the height adjustment button and slide the lower leg upward or downward until the height adjustment button is fully
engaged in the desired hole.
2. Repeat for other three leg attachments.
*Caution: Ensure that all four commode legs are adjusted to the same height, and that all height adjustment buttons protrude
fully through adjustment holes before use.
Use as a bedside commode
1. Set commode to desired height.
2. Slide commode pail under platform seat into pail support backrest. Ensure that
pail is properly positioned below commode opening.
3. When user is finished using commode, place commode pail lid over commode pail to contain odors.
4. Remove pail and lid simultaneously to empty pail. Clean seat and pail with disinfectant after each use.
*Caution: It is NOT recommended to remove the backrest when using as a bedside commode. Serious injury may result.
Drop-Arm usage
1. To lower drop-arms, pull drop-arm mechanism outward and gently move arm downward to rest alongside the frame.
2. To raise drop-arms, gently pull up arms until they are fully seated in latches. An audible click will be heard.
Beware of the risk of pinching when using

CARE AND MAINTENANCE

Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the product dry after each use.
•
Periodically clean the frame with a damp cloth and a mild detergent or disinfectant. For example, a mild chloride-based
disinfectant can be used.
•
Check that all 4 legs touch the floor at the same time without any wobble.
•
Check the product for cracks and damage, especially the seat and plastic tube.
•
In case of malfunction, do not repair the product yourself. Consult an authorised dealer.Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the article
Check the condition of the seat
Check the height adjustment and that the clips are fully extended
Check the folding function of the armrests
Version Mai 2023
Anytime Weekly
X
X
X
7